commit b6e8856b8a5f7fb8b2fc10636aa05cffed1781b9 Author: Greg Kroah-Hartman Date: Wed Feb 23 12:00:01 2022 +0100 Linux 5.4.181 Link: https://lore.kernel.org/r/20220221084915.554151737@linuxfoundation.org Tested-by: Guenter Roeck Tested-by: Shuah Khan Tested-by: Slade Watkins Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Tested-by: Jon Hunter Tested-by: Hulk Robot Signed-off-by: Greg Kroah-Hartman commit 3e73b02af6c3c61bbd0efe963f284bc428c8b99f Author: Jing Leng Date: Fri Feb 11 17:27:36 2022 +0800 kconfig: fix failing to generate auto.conf [ Upstream commit 1b9e740a81f91ae338b29ed70455719804957b80 ] When the KCONFIG_AUTOCONFIG is specified (e.g. export \ KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of include/config/ will not be created, so kconfig can't create deps files in it and auto.conf can't be generated. Signed-off-by: Jing Leng Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit 90c0d3cc676fe07c73dcfe6a7251895fe456a889 Author: Marc St-Amand Date: Wed Feb 9 15:13:25 2022 +0530 net: macb: Align the dma and coherent dma masks [ Upstream commit 37f7860602b5b2d99fc7465f6407f403f5941988 ] Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width. When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess. [ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks. Signed-off-by: Marc St-Amand Signed-off-by: Harini Katakam Acked-by: Nicolas Ferre Tested-by: Conor Dooley Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f1c3f41245d8e2774dcac4a4f3f80c83785a2770 Author: Slark Xiao Date: Wed Feb 9 10:47:17 2022 +0800 net: usb: qmi_wwan: Add support for Dell DW5829e [ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ] Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Slark Xiao Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 6b364ca4814a94054f13fe169f846787776ea4d3 Author: JaeSang Yoo Date: Wed Feb 9 04:54:22 2022 +0900 tracing: Fix tp_printk option related with tp_printk_stop_on_boot [ Upstream commit 3203ce39ac0b2a57a84382ec184c7d4a0bede175 ] The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is the same as another kernel parameter "tp_printk". If "tp_printk" setup is called before the "tp_printk_stop_on_boot", it will override the latter and keep it from being set. This is similar to other kernel parameter issues, such as: Commit 745a600cf1a6 ("um: console: Ignore console= option") or init/do_mounts.c:45 (setup function of "ro" kernel param) Fix it by checking for a "_" right after the "tp_printk" and if that exists do not process the parameter. Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com Signed-off-by: JaeSang Yoo [ Fixed up change log and added space after if condition ] Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit 8bf73d5ea94af3a60a05d724a0fc75cebbb46bb7 Author: Sascha Hauer Date: Wed Jan 26 15:55:24 2022 +0100 drm/rockchip: dw_hdmi: Do not leave clock enabled in error case [ Upstream commit c0cfbb122275da1b726481de5a8cffeb24e6322b ] The driver returns an error when devm_phy_optional_get() fails leaving the previously enabled clock turned on. Change order and enable the clock only after the phy has been acquired. Signed-off-by: Sascha Hauer Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20220126145549.617165-3-s.hauer@pengutronix.de Signed-off-by: Sasha Levin commit 5a21d5072300d0224dc167c16a5e8cdada3bee2e Author: Zoltán Böszörményi Date: Fri Feb 4 13:57:50 2022 +0100 ata: libata-core: Disable TRIM on M88V29 [ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ] This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA. While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command. TRIM must be disabled for this device. Signed-off-by: Zoltán Böszörményi Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit 41da91158ed956778cf8bc34b91c1acd270a8f54 Author: Brenda Streiff Date: Fri Jan 28 16:01:28 2022 -0600 kconfig: let 'shell' return enough output for deep path names [ Upstream commit 8a4c5b2a6d8ea079fa36034e8167de87ab6f8880 ] The 'shell' built-in only returns the first 256 bytes of the command's output. In some cases, 'shell' is used to return a path; by bumping up the buffer size to 4096 this lets us capture up to PATH_MAX. The specific case where I ran into this was due to commit 1e860048c53e ("gcc-plugins: simplify GCC plugin-dev capability test"). After this change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return a path; if the gcc path is particularly long, then the path ends up truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS depends test always fail. Signed-off-by: Brenda Streiff Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit 913932a306f03e3f9fe9fb0bb2ac8aded83678ff Author: Christian Hewitt Date: Wed Jan 26 04:49:54 2022 +0000 arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610 [ Upstream commit f26573e2bc9dfd551a0d5c6971f18cc546543312 ] The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files. Signed-off-by: Christian Hewitt Reviewed-by: Neil Armstrong Reviewed-by: Kevin Hilman Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com Signed-off-by: Sasha Levin commit d2fd1c7804e8a5acd29e5e0116933e3465ee631e Author: Christian Hewitt Date: Wed Jan 26 04:49:53 2022 +0000 arm64: dts: meson-g12: add ATF BL32 reserved-memory region [ Upstream commit 08982a1b3aa2611c9c711d24825c9002d28536f4 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Signed-off-by: Christian Hewitt Reviewed-by: Neil Armstrong Reviewed-by: Kevin Hilman Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com Signed-off-by: Sasha Levin commit daa868080996b29c8bb6cdd39cdf3fff6a681c1c Author: Christian Hewitt Date: Wed Jan 26 04:49:52 2022 +0000 arm64: dts: meson-gx: add ATF BL32 reserved-memory region [ Upstream commit 76577c9137456febb05b0e17d244113196a98968 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Suggested-by: Mateusz Krzak Signed-off-by: Christian Hewitt Reviewed-by: Neil Armstrong Reviewed-by: Kevin Hilman Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com Signed-off-by: Sasha Levin commit ba4b40356abd526a18c9804d93dbf63b20b2eebc Author: Florian Westphal Date: Fri Jan 28 13:13:32 2022 +0100 netfilter: conntrack: don't refresh sctp entries in closed state [ Upstream commit 77b337196a9d87f3d6bb9b07c0436ecafbffda1e ] Vivek Thrivikraman reported: An SCTP server application which is accessed continuously by client application. When the session disconnects the client retries to establish a connection. After restart of SCTP server application the session is not established because of stale conntrack entry with connection state CLOSED as below. (removing this entry manually established new connection): sctp 9 CLOSED src=10.141.189.233 [..] [ASSURED] Just skip timeout update of closed entries, we don't want them to stay around forever. Reported-and-tested-by: Vivek Thrivikraman Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579 Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit d4de2bbcbc918cec1fd84d01cde67b24f1049309 Author: Guo Ren Date: Sun Jan 30 21:56:34 2022 +0800 irqchip/sifive-plic: Add missing thead,c900-plic match string [ Upstream commit 1d4df649cbb4b26d19bea38ecff4b65b10a1bbca ] The thead,c900-plic has been used in opensbi to distinguish PLIC [1]. Although PLICs have the same behaviors in Linux, they are different hardware with some custom initializing in firmware(opensbi). Qute opensbi patch commit-msg by Samuel: The T-HEAD PLIC implementation requires setting a delegation bit to allow access from S-mode. Now that the T-HEAD PLIC has its own compatible string, set this bit automatically from the PLIC driver, instead of reaching into the PLIC's MMIO space from another driver. [1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31623a42ced45f38ea6 Signed-off-by: Guo Ren Cc: Anup Patel Cc: Marc Zyngier Cc: Palmer Dabbelt Cc: Samuel Holland Cc: Thomas Gleixner Tested-by: Samuel Holland Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org Signed-off-by: Sasha Levin commit 2d7a327a129ef10588114a1786b300d360dd2381 Author: Ye Guojin Date: Tue Nov 16 06:27:26 2021 +0000 ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of [ Upstream commit 34596ba380b03d181e24efd50e2f21045bde3696 ] This was found by coccicheck: ./arch/arm/mach-omap2/display.c, 272, 1-7, ERROR missing put_device; call of_find_device_by_node on line 258, but without a corresponding object release within this function. Move the put_device() call before the if judgment. Reported-by: Zeal Robot Signed-off-by: Ye Guojin Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin commit fff21185f598ad2d55be74d2a6fc7e9bcfbcd7d7 Author: Wan Jiabing Date: Thu Oct 14 04:57:19 2021 -0400 ARM: OMAP2+: hwmod: Add of_node_put() before break [ Upstream commit 80c469a0a03763f814715f3d12b6f3964c7423e8 ] Fix following coccicheck warning: ./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function for_each_matching_node should have of_node_put() before break Early exits from for_each_matching_node should decrement the node reference counter. Signed-off-by: Wan Jiabing Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin commit 3deabc3f60fd94c15594d208f83a96d4a50c76a7 Author: Jim Mattson Date: Wed Feb 2 17:48:13 2022 -0800 KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW [ Upstream commit 710c476514313c74045c41c0571bb5178fd16e3d ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by: Jim Mattson Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by: David Dunn Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin commit fe595759c2a4a5bb41c438474f15947d8ae32f5c Author: Miaoqian Lin Date: Fri Feb 4 01:30:08 2022 +0800 Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj [ Upstream commit 8bc69f86328e87a0ffa79438430cc82f3aa6a194 ] kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add(): If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: Miaoqian Lin Reviewed-by: Juan Vazquez Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com Signed-off-by: Wei Liu Signed-off-by: Sasha Levin commit ba71b1b30d857b3f6a5346788419f55deeaee480 Author: Rafał Miłecki Date: Tue Feb 15 08:27:35 2022 +0100 i2c: brcmstb: fix support for DSL and CM variants commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki Acked-by: Florian Fainelli Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman commit 6f08452c560d0b2468c7e362b4124e62906001f5 Author: Waiman Long Date: Tue Feb 8 11:39:12 2022 -0500 copy_process(): Move fd_install() out of sighand->siglock critical section commit ddc204b517e60ae64db34f9832dc41dafa77c751 upstream. I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups"), the pidfd installation was done without holding both the task_list lock and the sighand->siglock. Obviously, holding these two locks are not really needed to protect the fd_install() call. So move the fd_install() call down to after the releases of both locks. Link: https://lore.kernel.org/r/20220208163912.1084752-1-longman@redhat.com Fixes: 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups") Reviewed-by: "Eric W. Biederman" Signed-off-by: Waiman Long Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit e52dfd2a4906bb6baade5002d52d1cfee3d5972c Author: Jiasheng Jiang Date: Thu Jan 6 11:09:39 2022 +0800 dmaengine: sh: rcar-dmac: Check for error num after setting mask commit 2d21543efe332cd8c8f212fb7d365bc8b0690bfa upstream. Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Fixes: dc312349e875 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits") Signed-off-by: Jiasheng Jiang Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit c83049cb88177b932c03258ca37ac1e6b02d5826 Author: Eric Dumazet Date: Tue Feb 15 15:53:05 2022 -0800 net: sched: limit TC_ACT_REPEAT loops commit 5740d068909676d4bdb5c9c00c37a83df7728909 upstream. We have been living dangerously, at the mercy of malicious users, abusing TC_ACT_REPEAT, as shown by this syzpot report [1]. Add an arbitrary limit (32) to the number of times an action can return TC_ACT_REPEAT. v2: switch the limit to 32 instead of 10. Use net_warn_ratelimited() instead of pr_err_once(). [1] (C repro available on demand) rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0 (t=10502 jiffies g=5305 q=190) rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=3527 rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4986 [inline] __schedule+0xab2/0x4db0 kernel/sched/core.c:6295 schedule+0xd2/0x260 kernel/sched/core.c:6368 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline] RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline] RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline] RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508 Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84 RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80 FS: 00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline] queued_spin_lock include/asm-generic/qspinlock.h:85 [inline] do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:354 [inline] sch_tree_lock include/net/sch_generic.h:610 [inline] sch_tree_lock include/net/sch_generic.h:605 [inline] prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211 prio_init+0x5c/0x80 net/sched/sch_prio.c:244 qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7ee98aae99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0 R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4 INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs NMI backtrace for cpu 1 CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:604 [inline] check_cpu_stall kernel/rcu/tree_stall.h:688 [inline] rcu_pending kernel/rcu/tree.c:3919 [inline] rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286 Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246 RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0 R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8 tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256 tcf_action_exec net/sched/act_api.c:1049 [inline] tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026 tcf_exts_exec include/net/pkt_cls.h:326 [inline] route4_classify+0xef0/0x1400 net/sched/cls_route.c:179 __tcf_classify net/sched/cls_api.c:1549 [inline] tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615 prio_classify net/sched/sch_prio.c:42 [inline] prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668 __dev_xmit_skb net/core/dev.c:3756 [inline] __dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:306 [inline] __ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288 ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0x196/0x310 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126 iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82 geneve_xmit_skb drivers/net/geneve.c:966 [inline] geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one net/core/dev.c:3473 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489 __dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826 mld_send_cr net/ipv6/mcast.c:2127 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 ---------------- Code disassembly (best guess): 0: 48 89 eb mov %rbp,%rbx 3: c6 45 01 01 movb $0x1,0x1(%rbp) 7: 41 bc 00 80 00 00 mov $0x8000,%r12d d: 48 c1 e9 03 shr $0x3,%rcx 11: 83 e3 07 and $0x7,%ebx 14: 41 be 01 00 00 00 mov $0x1,%r14d 1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 21: fc ff df 24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13 28: eb 0c jmp 0x36 * 2a: f3 90 pause <-- trapping instruction 2c: 41 83 ec 01 sub $0x1,%r12d 30: 0f 84 72 04 00 00 je 0x4a8 36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax 3b: 38 d8 cmp %bl,%al 3d: 7f 08 jg 0x47 3f: 84 .byte 0x84 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Acked-by: Jamal Hadi Salim Cc: Cong Wang Cc: Jiri Pirko Reported-by: syzbot Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 87c575d2a238febe8a04241008f18252fe5d093d Author: Max Kellermann Date: Mon Feb 21 11:03:13 2022 +0100 lib/iov_iter: initialize "flags" in new pipe_buffer commit 9d2231c5d74e13b2a0546fee6737ee4446017903 upstream. The functions copy_page_to_iter_pipe() and push_pipe() can both allocate a new pipe_buffer, but the "flags" member initializer is missing. Fixes: 241699cd72a8 ("new iov_iter flavour: pipe-backed") To: Alexander Viro To: linux-fsdevel@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Max Kellermann Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit 091dac5c6392233b7a4fde6cb29a5f2656097942 Author: Eliav Farber Date: Thu Jan 13 10:06:19 2022 +0000 EDAC: Fix calculation of returned address and next offset in edac_align_ptr() commit f8efca92ae509c25e0a4bd5d0a86decea4f0c41e upstream. Do alignment logic properly and use the "ptr" local variable for calculating the remainder of the alignment. This became an issue because struct edac_mc_layer has a size that is not zero modulo eight, and the next offset that was prepared for the private data was unaligned, causing an alignment exception. The patch in Fixes: which broke this actually wanted to "what we actually care about is the alignment of the actual pointer that's about to be returned." But it didn't check that alignment. Use the correct variable "ptr" for that. [ bp: Massage commit message. ] Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()") Signed-off-by: Eliav Farber Signed-off-by: Borislav Petkov Cc: Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com Signed-off-by: Greg Kroah-Hartman commit f0c2c023c2266fb5802c3378613862f7d1a1590f Author: James Smart Date: Sat Feb 12 08:31:20 2022 -0800 scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop commit 7f4c5a26f735dea4bbc0eb8eb9da99cda95a8563 upstream. When connected point to point, the driver does not know the FC4's supported by the other end. In Fabrics, it can query the nameserver. Thus the driver must send PRLIs for the FC4s it supports and enable support based on the acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver supports SCSI and NVMe PRLIs. Unfortunately, although the behavior is per standard, many devices have come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI is properly RJT'd but the target decided that it must LOGO after seeing the unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is now in an infinite failure loop. Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI accept or reject status across logout as long as the link stays "up". When retrying login, if the prior NVMe PRLI was rejected, it will not be sent on the next login. Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com Cc: # v5.4+ Reviewed-by: Ewan D. Milne Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 56f9abba980527bc5dd500f5e02a224ae4bbcec1 Author: david regan Date: Wed Jan 26 23:43:44 2022 +0100 mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status commit 36415a7964711822e63695ea67fede63979054d9 upstream. The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan Reviewed-by: Florian Fainelli Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02 Signed-off-by: Greg Kroah-Hartman commit bdc70b603da9936f92150d8a6c190e8f90e30f09 Author: Bryan O'Donoghue Date: Mon Jan 3 03:03:15 2022 +0000 mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe() commit 5c23b3f965bc9ee696bf2ed4bdc54d339dd9a455 upstream. Interacting with a NAND chip on an IPQ6018 I found that the qcomsmem NAND partition parser was returning -EPROBE_DEFER waiting for the main smem driver to load. This caused the board to reset. Playing about with the probe() function shows that the problem lies in the core clock being switched off before the nandc_unalloc() routine has completed. If we look at how qcom_nandc_remove() tears down allocated resources we see the expected order is qcom_nandc_unalloc(nandc); clk_disable_unprepare(nandc->aon_clk); clk_disable_unprepare(nandc->core_clk); dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res), DMA_BIDIRECTIONAL, 0); Tweaking probe() to both bring up and tear-down in that order removes the reset if we end up deferring elsewhere. Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver") Signed-off-by: Bryan O'Donoghue Reviewed-by: Manivannan Sadhasivam Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-2-bryan.odonoghue@linaro.org Signed-off-by: Greg Kroah-Hartman commit 3758a570762e77ab83d743091e55f81d3ebd6b30 Author: Trond Myklebust Date: Tue Feb 15 18:05:18 2022 -0500 NFS: Do not report writeback errors in nfs_getattr() commit d19e0183a88306acda07f4a01fedeeffe2a2a06b upstream. The result of the writeback, whether it is an ENOSPC or an EIO, or anything else, does not inhibit the NFS client from reporting the correct file timestamps. Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit 357d42d593fc55bbd3be0dd50727d04a1652938e Author: Trond Myklebust Date: Tue Feb 8 13:38:23 2022 -0500 NFS: LOOKUP_DIRECTORY is also ok with symlinks commit e0caaf75d443e02e55e146fd75fe2efc8aed5540 upstream. Commit ac795161c936 (NFSv4: Handle case where the lookup of a directory fails) [1], part of Linux since 5.17-rc2, introduced a regression, where a symbolic link on an NFS mount to a directory on another NFS does not resolve(?) the first time it is accessed: Reported-by: Paul Menzel Fixes: ac795161c936 ("NFSv4: Handle case where the lookup of a directory fails") Signed-off-by: Trond Myklebust Tested-by: Donald Buczek Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit 20f4ee3c33407db32f0ae73445fc7076c238927c Author: Laibin Qiu Date: Sat Jan 22 19:10:45 2022 +0800 block/wbt: fix negative inflight counter when remove scsi device commit e92bc4cd34de2ce454bdea8cd198b8067ee4e123 upstream. Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in wbt_disable_default() when switch elevator to bfq. And when we remove scsi device, wbt will be enabled by wbt_enable_default. If it become false positive between wbt_wait() and wbt_track() when submit write request. The following is the scenario that triggered the problem. T1 T2 T3 elevator_switch_mq bfq_init_queue wbt_disable_default <= Set rwb->enable_state (OFF) Submit_bio blk_mq_make_request rq_qos_throttle <= rwb->enable_state (OFF) scsi_remove_device sd_remove del_gendisk blk_unregister_queue elv_unregister_queue wbt_enable_default <= Set rwb->enable_state (ON) q_qos_track <= rwb->enable_state (ON) ^^^^^^ this request will mark WBT_TRACKED without inflight add and will lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung. Fix this by move wbt_enable_default() from elv_unregister to bfq_exit_queue(). Only re-enable wbt when bfq exit. Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly") Remove oneline stale comment, and kill one oneshot local variable. Signed-off-by: Ming Lei Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/ Signed-off-by: Laibin Qiu Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 4cd3281a910a5adf73b2a0a82241dd67844d0b25 Author: Christian Eggers Date: Tue Jan 25 09:16:19 2022 +0100 mtd: rawnand: gpmi: don't leak PM reference in error path commit 9161f365c91614e5a3f5c6dcc44c3b1b33bc59c0 upstream. If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped. Reported-by: Pavel Machek Fixes: f53d4c109a66 ("mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings") Signed-off-by: Christian Eggers Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220125081619.6286-1-ceggers@arri.de Signed-off-by: Greg Kroah-Hartman commit c6fee7c8546a149fa8c490724302638e1ede1e35 Author: Anders Roxell Date: Fri Feb 11 01:51:13 2022 +0100 powerpc/lib/sstep: fix 'ptesync' build error commit fe663df7825811358531dc2e8a52d9eaa5e3515e upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:2088: Error: unrecognized opcode: `ptesync' make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1 Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function 'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like it got dropped inadvertently by commit 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs"). A key detail is that analyse_instr() will never recognise lwsync or ptesync on 32-bit (because of the existing ifdef), and as a result emulate_update_regs() should never be called with an op specifying either of those on 32-bit. So removing them from emulate_update_regs() should be a nop in terms of runtime behaviour. Fixes: 3cdfcbfd32b9 ("powerpc: Change analyse_instr so it doesn't modify *regs") Cc: stable@vger.kernel.org # v4.14+ Suggested-by: Arnd Bergmann Signed-off-by: Anders Roxell [mpe: Add last paragraph of change log mentioning analyse_instr() details] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman commit edfac6b77bc2b8ae718dacf5030d970257f3fc0b Author: Mark Brown Date: Tue Feb 1 15:56:28 2022 +0000 ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range() commit 650204ded3703b5817bd4b6a77fa47d333c4f902 upstream. When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit d6d8d1db8094bc6b078125d078787e50feb594eb Author: Mark Brown Date: Tue Feb 1 15:56:26 2022 +0000 ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw() commit 564778d7b1ea465f9487eedeece7527a033549c5 upstream. When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 99c2b13ce951d8ab0ca65db528f19ef544858bef Author: Takashi Iwai Date: Mon Feb 14 11:00:20 2022 +0100 ALSA: hda: Fix missing codec probe on Shenker Dock 15 commit dd8e5b161d7fb9cefa1f1d6e35a39b9e1563c8d3 upstream. By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the codec mask properly for the onboard audio. Let's set the forced codec mask to enable the codec discovery. Reported-by: dmummenschanz@web.de Cc: Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 2b2b531ceba9566a5641f01f5f36e1bbb8015b59 Author: Takashi Iwai Date: Mon Feb 14 11:00:19 2022 +0100 ALSA: hda: Fix regression on forced probe mask option commit 6317f7449348a897483a2b4841f7a9190745c81b upstream. The forced probe mask via probe_mask 0x100 bit doesn't work any longer as expected since the bus init code was moved and it's clearing the codec_mask value that was set beforehand. This patch fixes the long-time regression by moving the check_probe_mask() call. Fixes: a41d122449be ("ALSA: hda - Embed bus into controller object") Reported-by: dmummenschanz@web.de Cc: Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit aca7e5b6a5008dcf551516490b0ba4510e073d08 Author: Kees Cook Date: Sun Feb 13 10:24:43 2022 -0800 libsubcmd: Fix use-after-free for realloc(..., 0) commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream. GCC 12 correctly reports a potential use-after-free condition in the xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)" when size == 0: In file included from help.c:12: In function 'xrealloc', inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free] 56 | ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free] 58 | ret = realloc(ptr, 1); | ^~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence") Reported-by: Valdis Klētnieks Signed-off-by: Kees Kook Tested-by: Valdis Klētnieks Tested-by: Justin M. Forbes Acked-by: Josh Poimboeuf Cc: linux-hardening@vger.kernel.org Cc: Valdis Klētnieks Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit 7af6164ceefe319aaa8f4c90b0e3d4cbf894efb0 Author: Eric Dumazet Date: Mon Feb 14 11:15:53 2022 -0800 bonding: fix data-races around agg_select_timer commit 9ceaf6f76b203682bb6100e14b3d7da4c0bedde8 upstream. syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Jay Vosburgh Cc: Veaceslav Falico Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit aeb993412eb29bdb7e95845e1b16e0b8167e121e Author: Eric Dumazet Date: Thu Feb 10 09:13:31 2022 -0800 drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit commit dcd54265c8bc14bd023815e36e2d5f9d66ee1fee upstream. trace_napi_poll_hit() is reading stat->dev while another thread can write on it from dropmon_net_event() Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already, we only have to take care of load/store tearing. BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1: dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579 notifier_call_chain kernel/notifier.c:84 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392 call_netdevice_notifiers_info net/core/dev.c:1919 [inline] call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0: trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292 trace_napi_poll include/trace/events/napi.h:14 [inline] __napi_poll+0x36b/0x3f0 net/core/dev.c:6366 napi_poll net/core/dev.c:6432 [inline] net_rx_action+0x29e/0x650 net/core/dev.c:6519 __do_softirq+0x158/0x2de kernel/softirq.c:558 do_softirq+0xb1/0xf0 kernel/softirq.c:459 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:394 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 value changed: 0xffff88815883e000 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker Fixes: 4ea7e38696c7 ("dropmon: add ability to detect when hardware dropsrxpackets") Signed-off-by: Eric Dumazet Cc: Neil Horman Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit db3ffc5d332e2c5551964d54e3e814890ead1abd Author: Zhang Changzhong Date: Wed Feb 16 22:18:08 2022 +0800 bonding: force carrier update when releasing slave commit a6ab75cec1e461f8a35559054c146c21428430b8 upstream. In __bond_release_one(), bond_set_carrier() is only called when bond device has no slave. Therefore, if we remove the up slave from a master with two slaves and keep the down slave, the master will remain up. Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond)) statement. Reproducer: $ insmod bonding.ko mode=0 miimon=100 max_bonds=2 $ ifconfig bond0 up $ ifenslave bond0 eth0 eth1 $ ifconfig eth0 down $ ifenslave -d bond0 eth1 $ cat /proc/net/bonding/bond0 Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master") Signed-off-by: Zhang Changzhong Acked-by: Jay Vosburgh Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit fb8c98f92ad3a228f556997a8d2dbc067efb1745 Author: Xin Long Date: Wed Feb 16 00:20:52 2022 -0500 ping: fix the dif and sdif check in ping_lookup commit 35a79e64de29e8d57a5989aac57611c0cd29e13e upstream. When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" There is another regression caused when matching sk_bound_dev_if and dif, RAW socket is using inet_iif() while PING socket lookup is using skb->dev->ifindex, the cmd below fails due to this: # ip link add dummy0 type dummy # ip link set dummy0 up # ip addr add 192.168.111.1/24 dev dummy0 # ping -I dummy0 192.168.111.1 -c1 The issue was also reported on: https://github.com/iputils/iputils/issues/104 But fixed in iputils in a wrong way by not binding to device when destination IP is on device, and it will cause some of kselftests to fail, as Jianlin noticed. This patch is to use inet(6)_iif and inet(6)_sdif to get dif and sdif for PING socket, and keep consistent with RAW socket. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Jianlin Shi Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 8198c4d4c2f86705a21cd81aa46a6d2bf357387a Author: Miquel Raynal Date: Tue Feb 1 19:06:26 2022 +0100 net: ieee802154: ca8210: Fix lifs/sifs periods commit bdc120a2bcd834e571ce4115aaddf71ab34495de upstream. These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with the symbol_duration in order to get these values in microseconds. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220201180629.93410-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit a06440508acde957eddd02213b4746fdbc812606 Author: Mans Rullgard Date: Wed Feb 9 14:54:54 2022 +0000 net: dsa: lan9303: fix reset on probe commit 6bb9681a43f34f2cab4aad6e2a02da4ce54d13c5 upstream. The reset input to the LAN9303 chip is active low, and devicetree gpio handles reflect this. Therefore, the gpio should be requested with an initial state of high in order for the reset signal to be asserted. Other uses of the gpio already use the correct polarity. Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard Reviewed-by: Andrew Lunn Reviewed-by: Florian Fianelil Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 73f8575216b114beeb66ee5d16495d962b8c9f51 Author: Pablo Neira Ayuso Date: Thu Feb 10 10:06:42 2022 +0100 netfilter: nft_synproxy: unregister hooks on init error path commit 2b4e5fb4d3776c391e40fb33673ba946dd96012d upstream. Disable the IPv4 hooks if the IPv6 hooks fail to be registered. Fixes: ad49d86e07a4 ("netfilter: nf_tables: Add synproxy support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 5e8c5b217cfb46066c6cac9d0d754054d1ef9199 Author: Johannes Berg Date: Fri Jan 28 14:30:53 2022 +0200 iwlwifi: pcie: gen2: fix locking when "HW not ready" commit 4c29c1e27a1e178a219b3877d055e6dd643bdfda upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this in the gen2 code as well. Fixes: eda50cde58de ("iwlwifi: pcie: add context information support") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid Signed-off-by: Greg Kroah-Hartman commit e1d0e738b02ec96aa9f89540eb61cb224c37feea Author: Johannes Berg Date: Fri Jan 28 14:30:52 2022 +0200 iwlwifi: pcie: fix locking when "HW not ready" commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this. Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid Signed-off-by: Greg Kroah-Hartman commit 902528183f4d94945a0c1ed6048d4a5d4e1e712e Author: Christian Löhle Date: Fri Feb 4 15:11:37 2022 +0000 mmc: block: fix read single on recovery logic commit 54309fde1a352ad2674ebba004a79f7d20b9f037 upstream. On reads with MMC_READ_MULTIPLE_BLOCK that fail, the recovery handler will use MMC_READ_SINGLE_BLOCK for each of the blocks, up to MMC_READ_SINGLE_RETRIES times each. The logic for this is fixed to never report unsuccessful reads as success to the block layer. On command error with retries remaining, blk_update_request was called with whatever value error was set last to. In case it was last set to BLK_STS_OK (default), the read will be reported as success, even though there was no data read from the device. This could happen on a CRC mismatch for the response, a card rejecting the command (e.g. again due to a CRC mismatch). In case it was last set to BLK_STS_IOERR, the error is reported correctly, but no retries will be attempted. Fixes: 81196976ed946c ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Reviewed-by: Adrian Hunter Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 5f326fe2aef411a6575628f92bd861463ea91df7 Author: Seth Forshee Date: Thu Feb 17 08:13:12 2022 -0600 vsock: remove vsock from connected table when connect is interrupted by a signal commit b9208492fcaecff8f43915529ae34b3bcb03877c upstream. vsock_connect() expects that the socket could already be in the TCP_ESTABLISHED state when the connecting task wakes up with a signal pending. If this happens the socket will be in the connected table, and it is not removed when the socket state is reset. In this situation it's common for the process to retry connect(), and if the connection is successful the socket will be added to the connected table a second time, corrupting the list. Prevent this by calling vsock_remove_connected() if a signal is received while waiting for a connection. This is harmless if the socket is not in the connected table, and if it is in the table then removing it will prevent list corruption from a double add. Note for backporting: this patch requires d5afa82c977e ("vsock: correct removal of socket from the list"), which is in all current stable trees except 4.9.y. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Seth Forshee Reviewed-by: Stefano Garzarella Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit f48a38703c11646716e5f270439991a8e45b4518 Author: Tudor Ambarus Date: Wed Dec 15 13:01:05 2021 +0200 dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending commit e6af9b05bec63cd4d1de2a33968cd0be2a91282a upstream. Cyclic channels must too call issue_pending in order to start a transfer. Start the transfer in issue_pending regardless of the type of channel. This wrongly worked before, because in the past the transfer was started at tx_submit level when only a desc in the transfer list. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Change-Id: If1bf3e13329cebb9904ae40620f6cf2b7f06fe9f Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20211215110115.191749-3-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul Signed-off-by: Mickael GARDET Signed-off-by: Greg Kroah-Hartman commit 41ce06a3ec6aac0722451264792605c2e42d187a Author: Eric W. Biederman Date: Mon Jan 3 11:32:36 2022 -0600 taskstats: Cleanup the use of task->exit_code commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream. In the function bacct_add_task the code reading task->exit_code was introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats"), and it is not entirely clear what the taskstats interface is trying to return as only returning the exit_code of the first task in a process doesn't make a lot of sense. As best as I can figure the intent is to return task->exit_code after a task exits. The field is returned with per task fields, so the exit_code of the entire process is not wanted. Only the value of the first task is returned so this is not a useful way to get the per task ptrace stop code. The ordinary case of returning this value is returning after a task exits, which also precludes use for getting a ptrace value. It is common to for the first task of a process to also be the last task of a process so this field may have done something reasonable by accident in testing. Make ac_exitcode a reliable per task value by always returning it for every exited task. Setting ac_exitcode in a sensible mannter makes it possible to continue to provide this value going forward. Cc: Balbir Singh Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats") Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 8583d2ea90fe4f41af865225d5be326499d6cc6f Author: Zhang Yi Date: Wed Sep 8 20:08:50 2021 +0800 ext4: prevent partial update of the extent blocks commit 0f2f87d51aebcf71a709b52f661d681594c7dffa upstream. In the most error path of current extents updating operations are not roll back partial updates properly when some bad things happens(.e.g in ext4_ext_insert_extent()). So we may get an inconsistent extents tree if journal has been aborted due to IO error, which may probability lead to BUGON later when we accessing these extent entries in errors=continue mode. This patch drop extent buffer's verify flag before updatng the contents in ext4_ext_get_access(), and reset it after updating in __ext4_ext_dirty(). After this patch we could force to check the extent buffer if extents tree updating was break off, make sure the extents are consistent. Signed-off-by: Zhang Yi Reviewed-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210908120850.4012324-4-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Leah Rumancik Signed-off-by: Greg Kroah-Hartman commit d57fcf0d9195543efc392e147209e150dcbabb5b Author: Zhang Yi Date: Wed Sep 8 20:08:49 2021 +0800 ext4: check for inconsistent extents between index and leaf block commit 9c6e071913792d80894cd0be98cc3c4b770e26d3 upstream. Now that we can check out overlapping extents in leaf block and out-of-order index extents in index block. But the .ee_block in the first extent of one leaf block should equal to the .ei_block in it's parent index extent entry. This patch add a check to verify such inconsistent between the index and leaf block. Signed-off-by: Zhang Yi Link: https://lore.kernel.org/r/20210908120850.4012324-3-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Leah Rumancik Signed-off-by: Greg Kroah-Hartman commit 6a332d095ce4accd064805c0e3654d3bd0383711 Author: Zhang Yi Date: Wed Sep 8 20:08:48 2021 +0800 ext4: check for out-of-order index extents in ext4_valid_extent_entries() commit 8dd27fecede55e8a4e67eef2878040ecad0f0d33 upstream. After commit 5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()"), we can check out the overlapping extent entry in leaf extent blocks. But the out-of-order extent entry in index extent blocks could also trigger bad things if the filesystem is inconsistent. So this patch add a check to figure out the out-of-order index extents and return error. Signed-off-by: Zhang Yi Reviewed-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210908120850.4012324-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Leah Rumancik Signed-off-by: Greg Kroah-Hartman commit 13f6ebef03b0359fac82a8460454374098f66995 Author: Nicholas Bishop Date: Fri Feb 11 14:57:39 2022 -0500 drm/radeon: Fix backlight control on iMac 12,1 commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream. The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 494de920d98f125b099f27a2d274850750aff957 Author: Johannes Berg Date: Tue Feb 8 11:47:30 2022 +0100 iwlwifi: fix use-after-free commit bea2662e7818e15d7607d17d57912ac984275d94 upstream. If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. Cc: stable@vger.kernel.org Reported-by: Stefan Agner Reported-by: Wolfgang Walter Reported-by: Jason Self Reported-by: Dominik Behr Reported-by: Marek Marczykowski-Górecki Fixes: ab07506b0454 ("iwlwifi: fix leaks/bad data after failed firmware load") Signed-off-by: Johannes Berg Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid Signed-off-by: Greg Kroah-Hartman commit 6194b468973167b9708b1cdb61611f08f0caf20d Author: Mark Rutland Date: Thu Oct 17 15:26:38 2019 +0100 arm64: module/ftrace: intialize PLT at load time commit f1a54ae9af0da4d76239256ed640a93ab3aadac0 upstream. Currently we lazily-initialize a module's ftrace PLT at runtime when we install the first ftrace call. To do so we have to apply a number of sanity checks, transiently mark the module text as RW, and perform an IPI as part of handling Neoverse-N1 erratum #1542419. We only expect the ftrace trampoline to point at ftrace_caller() (AKA FTRACE_ADDR), so let's simplify all of this by intializing the PLT at module load time, before the module loader marks the module RO and performs the intial I-cache maintenance for the module. Thus we can rely on the module having been correctly intialized, and can simplify the runtime work necessary to install an ftrace call in a module. This will also allow for the removal of module_disable_ro(). Tested by forcing ftrace_make_call() to use the module PLT, and then loading up a module after setting up ftrace with: | echo ":mod:" > set_ftrace_filter; | echo function > current_tracer; | modprobe Since FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is selected, we wrap its use along with most of module_init_ftrace_plt() with ifdeffery rather than using IS_ENABLED(). Signed-off-by: Mark Rutland Reviewed-by: Amit Daniel Kachhap Reviewed-by: Ard Biesheuvel Reviewed-by: Torsten Duwe Tested-by: Amit Daniel Kachhap Tested-by: Torsten Duwe Cc: Catalin Marinas Cc: James Morse Cc: Peter Zijlstra Cc: Will Deacon Cc: Stephen Boyd Signed-off-by: Greg Kroah-Hartman commit adcc4b795f4cbe1f538754f0eb31f37a7d98a738 Author: Mark Rutland Date: Thu Oct 17 14:03:26 2019 +0100 arm64: module: rework special section handling commit bd8b21d3dd661658addc1cd4cc869bab11d28596 upstream. When we load a module, we have to perform some special work for a couple of named sections. To do this, we iterate over all of the module's sections, and perform work for each section we recognize. To make it easier to handle the unexpected absence of a section, and to make the section-specific logic easer to read, let's factor the section search into a helper. Similar is already done in the core module loader, and other architectures (and ideally we'd unify these in future). If we expect a module to have an ftrace trampoline section, but it doesn't have one, we'll now reject loading the module. When ARM64_MODULE_PLTS is selected, any correctly built module should have one (and this is assumed by arm64's ftrace PLT code) and the absence of such a section implies something has gone wrong at build time. Subsequent patches will make use of the new helper. Signed-off-by: Mark Rutland Reviewed-by: Ard Biesheuvel Reviewed-by: Torsten Duwe Tested-by: Amit Daniel Kachhap Tested-by: Torsten Duwe Cc: Catalin Marinas Cc: James Morse Cc: Will Deacon Cc: Stephen Boyd Signed-off-by: Greg Kroah-Hartman commit dfe928f16cc5dc0e3fe3ed81254be05ceddf97da Author: Mark Rutland Date: Wed Oct 16 18:17:11 2019 +0100 module/ftrace: handle patchable-function-entry commit a1326b17ac03a9012cb3d01e434aacb4d67a416c upstream. When using patchable-function-entry, the compiler will record the callsites into a section named "__patchable_function_entries" rather than "__mcount_loc". Let's abstract this difference behind a new FTRACE_CALLSITE_SECTION, so that architectures don't have to handle this explicitly (e.g. with custom module linker scripts). As parisc currently handles this explicitly, it is fixed up accordingly, with its custom linker script removed. Since FTRACE_CALLSITE_SECTION is only defined when DYNAMIC_FTRACE is selected, the parisc module loading code is updated to only use the definition in that case. When DYNAMIC_FTRACE is not selected, modules shouldn't have this section, so this removes some redundant work in that case. To make sure that this is keep up-to-date for modules and the main kernel, a comment is added to vmlinux.lds.h, with the existing ifdeffery simplified for legibility. I built parisc generic-{32,64}bit_defconfig with DYNAMIC_FTRACE enabled, and verified that the section made it into the .ko files for modules. Signed-off-by: Mark Rutland Acked-by: Helge Deller Acked-by: Steven Rostedt (VMware) Reviewed-by: Ard Biesheuvel Reviewed-by: Torsten Duwe Tested-by: Amit Daniel Kachhap Tested-by: Sven Schnelle Tested-by: Torsten Duwe Cc: Ingo Molnar Cc: James E.J. Bottomley Cc: Jessica Yu Cc: linux-parisc@vger.kernel.org Cc: Stephen Boyd Signed-off-by: Greg Kroah-Hartman commit 30af4dcfa8b436ce757e0be95a8b14dd08ea734a Author: Mark Rutland Date: Wed Oct 16 17:51:10 2019 +0100 ftrace: add ftrace_init_nop() commit fbf6c73c5b264c25484fa9f449b5546569fe11f0 upstream. Architectures may need to perform special initialization of ftrace callsites, and today they do so by special-casing ftrace_make_nop() when the expected branch address is MCOUNT_ADDR. In some cases (e.g. for patchable-function-entry), we don't have an mcount-like symbol and don't want a synthetic MCOUNT_ADDR, but we may need to perform some initialization of callsites. To make it possible to separate initialization from runtime modification, and to handle cases without an mcount-like symbol, this patch adds an optional ftrace_init_nop() function that architectures can implement, which does not pass a branch address. Where an architecture does not provide ftrace_init_nop(), we will fall back to the existing behaviour of calling ftrace_make_nop() with MCOUNT_ADDR. At the same time, ftrace_code_disable() is renamed to ftrace_nop_initialize() to make it clearer that it is intended to intialize a callsite into a disabled state, and is not for disabling a callsite that has been runtime enabled. The kerneldoc description of rec arguments is updated to cover non-mcount callsites. Signed-off-by: Mark Rutland Reviewed-by: Amit Daniel Kachhap Reviewed-by: Ard Biesheuvel Reviewed-by: Miroslav Benes Reviewed-by: Steven Rostedt (VMware) Reviewed-by: Torsten Duwe Tested-by: Amit Daniel Kachhap Tested-by: Sven Schnelle Tested-by: Torsten Duwe Cc: Ingo Molnar Cc: Stephen Boyd Signed-off-by: Greg Kroah-Hartman commit 42c8cccf83d5adb8f34326f2b05cc053fb740e08 Author: Igor Pylypiv Date: Thu Jan 27 15:39:53 2022 -0800 Revert "module, async: async_synchronize_full() on module init iff async is used" [ Upstream commit 67d6212afda218d564890d1674bab28e8612170f ] This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv Reviewed-by: Changyuan Lyu Reviewed-by: Luis Chamberlain Acked-by: Tejun Heo Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 5c7726bd573661b9b835c214d54f93f56a0e4cfb Author: Christian König Date: Fri Jan 28 13:21:10 2022 +0100 drm/amdgpu: fix logic inversion in check [ Upstream commit e8ae38720e1a685fd98cfa5ae118c9d07b45ca79 ] We probably never trigger this, but the logic inside the check is inverted. Signed-off-by: Christian König Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit d411b2a5da68b8a130c23097014434ac140a2ace Author: Sagi Grimberg Date: Tue Feb 1 14:54:21 2022 +0200 nvme-rdma: fix possible use-after-free in transport error_recovery work [ Upstream commit b6bb1722f34bbdbabed27acdceaf585d300c5fd2 ] While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin commit 61a26ffd5ad3ece456d74c4c79f7b5e3f440a141 Author: Sagi Grimberg Date: Tue Feb 1 14:54:20 2022 +0200 nvme-tcp: fix possible use-after-free in transport error_recovery work [ Upstream commit ff9fc7ebf5c06de1ef72a69f9b1ab40af8b07f9e ] While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Tested-by: Chris Leech Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin commit 70356b756a58704e5c8818cb09da5854af87e765 Author: Sagi Grimberg Date: Tue Feb 1 14:54:19 2022 +0200 nvme: fix a possible use-after-free in controller reset during load [ Upstream commit 0fa0f99fc84e41057cbdd2efbfe91c6b2f47dd9d ] Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin commit 89d2bd13252aaf905be73444d395ba25f9ac1e87 Author: Darrick J. Wong Date: Sun Jan 30 08:53:16 2022 -0800 quota: make dquot_quota_sync return errors from ->sync_fs [ Upstream commit dd5532a4994bfda0386eb2286ec00758cee08444 ] Strangely, dquot_quota_sync ignores the return code from the ->sync_fs call, which means that quotacalls like Q_SYNC never see the error. This doesn't seem right, so fix that. Signed-off-by: Darrick J. Wong Reviewed-by: Jan Kara Reviewed-by: Christoph Hellwig Acked-by: Christian Brauner Signed-off-by: Sasha Levin commit f124d9eff984b6280f40380f1a0dad381176ac15 Author: Darrick J. Wong Date: Sun Jan 30 08:53:16 2022 -0800 vfs: make freeze_super abort when sync_filesystem returns error [ Upstream commit 2719c7160dcfaae1f73a1c0c210ad3281c19022e ] If we fail to synchronize the filesystem while preparing to freeze the fs, abort the freeze. Signed-off-by: Darrick J. Wong Reviewed-by: Jan Kara Reviewed-by: Christoph Hellwig Acked-by: Christian Brauner Signed-off-by: Sasha Levin commit cfc8b37ef0418529e3719c2d128e59e74a3114b0 Author: Duoming Zhou Date: Fri Jan 28 12:47:15 2022 +0800 ax25: improve the incomplete fix to avoid UAF and NPD bugs [ Upstream commit 4e0f718daf97d47cf7dec122da1be970f145c809 ] The previous commit 1ade48d0c27d ("ax25: NPD bug when detaching AX25 device") introduce lock_sock() into ax25_kill_by_device to prevent NPD bug. But the concurrency NPD or UAF bug will occur, when lock_sock() or release_sock() dereferences the ax25_cb->sock. The NULL pointer dereference bug can be shown as below: ax25_kill_by_device() | ax25_release() | ax25_destroy_socket() | ax25_cb_del() ... | ... | ax25->sk=NULL; lock_sock(s->sk); //(1) | s->ax25_dev = NULL; | ... release_sock(s->sk); //(2) | ... | The root cause is that the sock is set to null before dereference site (1) or (2). Therefore, this patch extracts the ax25_cb->sock in advance, and uses ax25_list_lock to protect it, which can synchronize with ax25_cb_del() and ensure the value of sock is not null before dereference sites. The concurrency UAF bug can be shown as below: ax25_kill_by_device() | ax25_release() | ax25_destroy_socket() ... | ... | sock_put(sk); //FREE lock_sock(s->sk); //(1) | s->ax25_dev = NULL; | ... release_sock(s->sk); //(2) | ... | The root cause is that the sock is released before dereference site (1) or (2). Therefore, this patch uses sock_hold() to increase the refcount of sock and uses ax25_list_lock to protect it, which can synchronize with ax25_cb_del() in ax25_destroy_socket() and ensure the sock wil not be released before dereference sites. Signed-off-by: Duoming Zhou Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit dd2fcac324eac88671115076f2c8eed8739de03c Author: Yang Xu Date: Thu Jan 27 17:11:37 2022 +0800 selftests/zram: Adapt the situation that /dev/zram0 is being used [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit c3a9afa82493783c823fbaee4044f6d5fbe92360 Author: Yang Xu Date: Thu Jan 27 17:11:36 2022 +0800 selftests/zram01.sh: Fix compression ratio calculation [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit 8d1c50c8683e9d9804ebdef7d434f0a100d4b5ce Author: Yang Xu Date: Thu Jan 27 17:11:35 2022 +0800 selftests/zram: Skip max_comp_streams interface on newer kernel [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit 455ef08d6e5473526fa6763f75a93f7198206966 Author: Miquel Raynal Date: Tue Jan 25 13:14:23 2022 +0100 net: ieee802154: at86rf230: Stop leaking skb's [ Upstream commit e5ce576d45bf72fd0e3dc37eff897bfcc488f6a9 ] Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. In the Tx case we then leak the skb structure. Free the skb structure upon error before returning when appropriate. As the 'is_tx = 0' cannot be moved in the complete handler because of a possible race between the delay in switching to STATE_RX_AACK_ON and a new interrupt, we introduce an intermediate 'was_tx' boolean just for this purpose. There is no Fixes tag applying here, many changes have been made on this area and the issue kind of always existed. Suggested-by: Alexander Aring Signed-off-by: Miquel Raynal Acked-by: Alexander Aring Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt Signed-off-by: Sasha Levin commit 3bd8bebb16fe02d2d5aadc31c3ac5aab096bf83a Author: Nícolas F. R. A. Prado Date: Wed Jan 12 14:41:42 2022 -0500 selftests: rtc: Increase test timeout so that all tests run [ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ] The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado Acked-by: Alexandre Belloni Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit bc6ac6c0f67de61d10643e8b298fe5f0da2e28a0 Author: Srinivas Pandruvada Date: Tue Jan 11 18:25:21 2022 -0800 platform/x86: ISST: Fix possible circular locking dependency detected [ Upstream commit 17da2d5f93692086dd096a975225ffd5622d0bf8 ] As reported: [ 256.104522] ====================================================== [ 256.113783] WARNING: possible circular locking dependency detected [ 256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted [ 256.125362] ------------------------------------------------------ [ 256.131673] intel-speed-sel/844 is trying to acquire lock: [ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common] [ 256.147171] [ 256.147171] but task is already holding lock: [ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170 [ 256.160407] [ 256.160407] which lock already depends on the new lock. [ 256.160407] [ 256.168712] [ 256.168712] the existing dependency chain (in reverse order) is: [ 256.176327] [ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}: [ 256.181946] lock_acquire+0x1e6/0x330 [ 256.186265] __mutex_lock+0x9b/0x9b0 [ 256.190497] mutex_lock_nested+0x1b/0x20 [ 256.195075] misc_register+0x32/0x1a0 [ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common] [ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio] ... [ 256.241976] [ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}: [ 256.248552] validate_chain+0xbc6/0x1750 [ 256.253131] __lock_acquire+0x88c/0xc10 [ 256.257618] lock_acquire+0x1e6/0x330 [ 256.261933] __mutex_lock+0x9b/0x9b0 [ 256.266165] mutex_lock_nested+0x1b/0x20 [ 256.270739] isst_if_open+0x18/0x90 [isst_if_common] [ 256.276356] misc_open+0x100/0x170 [ 256.280409] chrdev_open+0xa5/0x1e0 ... The call sequence suggested that misc_device /dev file can be opened before misc device is yet to be registered, which is done only once. Here punit_misc_dev_lock was used as common lock, to protect the registration by multiple ISST HW drivers, one time setup, prevent duplicate registry of misc device and prevent load/unload when device is open. We can split into locks: - One which just prevent duplicate call to misc_register() and one time setup. Also never call again if the misc_register() failed or required one time setup is failed. This lock is not shared with any misc device callbacks. - The other lock protects registry, load and unload of HW drivers. Sequence in isst_if_cdev_register() - Register callbacks under punit_misc_dev_open_lock - Call isst_misc_reg() which registers misc_device on the first registry which is under punit_misc_dev_reg_lock, which is not shared with callbacks. Sequence in isst_if_cdev_unregister Just opposite of isst_if_cdev_register Reported-and-tested-by: Liwei Song Signed-off-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin commit bd6492930a103180a1eb19fa6ecd8384b821b137 Author: Dāvis Mosāns Date: Sat Feb 5 20:48:23 2022 +0200 btrfs: send: in case of IO error log it commit 2e7be9db125a0bf940c5d65eb5c40d8700f738b5 upstream. Currently if we get IO error while doing send then we abort without logging information about which file caused issue. So log it to help with debugging. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Dāvis Mosāns Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 3ff48a67ed6585520e231ef69db38200dcd83c7d Author: John David Anglin Date: Thu Jan 27 22:33:41 2022 +0000 parisc: Fix sglist access in ccio-dma.c commit d7da660cab47183cded65e11b64497d0f56c6edf upstream. This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c. It ensures that only the allocated entries of the sglist are accessed. Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit efccc9b0c7e28d0eb7918a236e59f60dc23db4c3 Author: John David Anglin Date: Wed Jan 26 20:39:05 2022 +0000 parisc: Fix data TLB miss in sba_unmap_sg commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream. Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. Reported-by: Rolf Eike Beer Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 3434d8837fe946b87ac9960454ba6b0c5f74d8e5 Author: John David Anglin Date: Sat Jan 22 18:19:49 2022 +0000 parisc: Drop __init from map_pages declaration commit 9129886b88185962538180625ca8051362b01327 upstream. With huge kernel pages, we randomly eat a SPARC in map_pages(). This is fixed by dropping __init from the declaration. However, map_pages references the __init routine memblock_alloc_try_nid via memblock_alloc. Thus, it needs to be marked with __ref. memblock_alloc is only called before the kernel text is set to readonly. The __ref on free_initmem is no longer needed. Comment regarding map_pages being in the init section is removed. Signed-off-by: John David Anglin Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit bd282ee53e34c5bc7b2dc45bb5f1b7070923598e Author: Randy Dunlap Date: Mon Feb 14 10:00:19 2022 -0800 serial: parisc: GSC: fix build when IOSAPIC is not set commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream. There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby Cc: Johan Hovold Suggested-by: Helge Deller Signed-off-by: Helge Deller Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 9d2aad133b22d599bd54952f5223d866ef34aa0a Author: Sean Christopherson Date: Fri Feb 4 21:41:55 2022 +0000 Revert "svm: Add warning message for AVIC IPI invalid target" commit dd4589eee99db8f61f7b8f7df1531cad3f74a64d upstream. Remove a WARN on an "AVIC IPI invalid target" exit, the WARN is trivial to trigger from guest as it will fail on any destination APIC ID that doesn't exist from the guest's perspective. Don't bother recording anything in the kernel log, the common tracepoint for kvm_avic_incomplete_ipi() is sufficient for debugging. This reverts commit 37ef0c4414c9743ba7f1af4392f0a27a99649f2a. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20220204214205.3306634-2-seanjc@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 1902725520997410fc3d30a39191f81930c74a75 Author: Sergio Costas Date: Fri Feb 4 10:01:17 2022 +0100 HID:Add support for UGTABLET WP5540 commit fd5dd6acd8f823ea804f76d3af64fa1be9d5fb78 upstream. This patch adds support for the UGTABLET WP5540 digitizer tablet devices. Without it, the pen moves the cursor, but neither the buttons nor the tap sensor in the tip do work. Signed-off-by: Sergio Costas Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman commit 866a85813b9287f75ad1e4d4c472002a7f2e1481 Author: Nathan Chancellor Date: Wed Feb 2 16:05:16 2022 -0700 Makefile.extrawarn: Move -Wunaligned-access to W=1 commit 1cf5f151d25fcca94689efd91afa0253621fb33a upstream. -Wunaligned-access is a new warning in clang that is default enabled for arm and arm64 under certain circumstances within the clang frontend (see LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows 1284 total/70 unique instances of this warning (most of the instances are in header files), which is quite noisy. To keep a normal build green through CONFIG_WERROR, only show this warning with W=1, which will allow automated build systems to catch new instances of the warning so that the total number can be driven down to zero eventually since catching unaligned accesses at compile time would be generally useful. Cc: stable@vger.kernel.org Link: https://github.com/llvm/llvm-project/commit/35737df4dcd28534bd3090157c224c19b501278a Link: https://github.com/ClangBuiltLinux/linux/issues/1569 Link: https://github.com/ClangBuiltLinux/linux/issues/1576 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Masahiro Yamada [nathan: Fix conflict due to lack of afe956c577b2d] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman