commit 771a8acbb84145b943bd608ba376e104ebfa9664 Author: Greg Kroah-Hartman Date: Thu Nov 10 17:57:58 2022 +0100 Linux 5.4.224 Link: https://lore.kernel.org/r/20221108133333.659601604@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Guenter Roeck Tested-by: Jon Hunter Tested-by: Shuah Khan Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 3e0c1ab197eb7ae9e22783d8fdb7b6ab07854097 Author: Vasily Averin Date: Sat Sep 11 10:40:08 2021 +0300 ipc: remove memcg accounting for sops objects in do_semtimedop() commit 6a4746ba06191e23d30230738e94334b26590a8a upstream. Linus proposes to revert an accounting for sops objects in do_semtimedop() because it's really just a temporary buffer for a single semtimedop() system call. This object can consume up to 2 pages, syscall is sleeping one, size and duration can be controlled by user, and this allocation can be repeated by many thread at the same time. However Shakeel Butt pointed that there are much more popular objects with the same life time and similar memory consumption, the accounting of which was decided to be rejected for performance reasons. Considering at least 2 pages for task_struct and 2 pages for the kernel stack, a back of the envelope calculation gives a footprint amplification of <1.5 so this temporal buffer can be safely ignored. The factor would IMO be interesting if it was >> 2 (from the PoV of excessive (ab)use, fine-grained accounting seems to be currently unfeasible due to performance impact). Link: https://lore.kernel.org/lkml/90e254df-0dfe-f080-011e-b7c53ee7fd20@virtuozzo.com/ Fixes: 18319498fdd4 ("memcg: enable accounting of ipc resources") Signed-off-by: Vasily Averin Acked-by: Michal Hocko Reviewed-by: Michal Koutný Acked-by: Shakeel Butt Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit a16415c8f156bec5399ef0345715ee4b90e5bb83 Author: Dokyung Song Date: Fri Oct 21 15:13:59 2022 +0900 wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker() commit 6788ba8aed4e28e90f72d68a9d794e34eac17295 upstream. This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song Reported-by: Jisoo Jang Reported-by: Minsuk Kang Reviewed-by: Arend van Spriel Cc: Signed-off-by: Dokyung Song Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna Signed-off-by: Greg Kroah-Hartman commit a24bf3c317b2724a3a7abd6d0cc943699e092883 Author: Ville Syrjälä Date: Wed Oct 26 13:11:28 2022 +0300 drm/i915/sdvo: Setup DDC fully before output init commit e79762512120f11c51317570519a1553c70805d8 upstream. Call intel_sdvo_select_ddc_bus() before initializing any of the outputs. And before that is functional (assuming no VBT) we have to set up the controlled_outputs thing. Otherwise DDC won't be functional during the output init but LVDS really needs it for the fixed mode setup. Note that the whole multi output support still looks very bogus, and more work will be needed to make it correct. But for now this should at least fix the LVDS EDID fixed mode setup. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7301 Fixes: aa2b88074a56 ("drm/i915/sdvo: Fix multi function encoder stuff") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit 64b7b557dc8a96d9cfed6aedbf81de2df80c025d) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman commit 4dadd4b161782a219a1b6718d6de1bbf5bce7b1f Author: Ville Syrjälä Date: Wed Oct 26 13:11:27 2022 +0300 drm/i915/sdvo: Filter out invalid outputs more sensibly commit 3e206b6aa6df7eed4297577e0cf8403169b800a2 upstream. We try to filter out the corresponding xxx1 output if the xxx0 output is not present. But the way that is being done is pretty awkward. Make it less so. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20221026101134.20865-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit cc1e66394daaa7e9f005e2487a84e34a39f9308b) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman commit 57306fef4d10ea0d91709d2e3e9f46df066e52d2 Author: Brian Norris Date: Wed Oct 19 17:03:49 2022 -0700 drm/rockchip: dsi: Force synchronous probe commit 81e592f86f7afdb76d655e7fbd7803d7b8f985d8 upstream. We can't safely probe a dual-DSI display asynchronously (driver_async_probe='*' or driver_async_probe='dw-mipi-dsi-rockchip' cmdline), because dw_mipi_dsi_rockchip_find_second() pokes one DSI device's drvdata from the other device without any locking. Request synchronous probe, at least until this driver learns some appropriate locking for dual-DSI initialization. Cc: Signed-off-by: Brian Norris Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20221019170255.2.I6b985b0ca372b7e35c6d9ea970b24bcb262d4fc1@changeid Signed-off-by: Greg Kroah-Hartman commit e09ff743e30b91a7a89cdee61dc1c8b06d4add11 Author: Sascha Hauer Date: Fri Jul 1 13:03:41 2022 +0200 mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times commit 0fddf9ad06fd9f439f137139861556671673e31c upstream. 06781a5026350 Fixes the calculation of the DEVICE_BUSY_TIMEOUT register value from busy_timeout_cycles. busy_timeout_cycles is calculated wrong though: It is calculated based on the maximum page read time, but the timeout is also used for page write and block erase operations which require orders of magnitude bigger timeouts. Fix this by calculating busy_timeout_cycles from the maximum of tBERS_max and tPROG_max. This is for now the easiest and most obvious way to fix the driver. There's room for improvements though: The NAND_OP_WAITRDY_INSTR tells us the desired timeout for the current operation, so we could program the timeout dynamically for each operation instead of setting a fixed timeout. Also we could wire up the interrupt handler to actually detect and forward timeouts occurred when waiting for the chip being ready. As a sidenote I verified that the change in 06781a5026350 is really correct. I wired up the interrupt handler in my tree and measured the time between starting the operation and the timeout interrupt handler coming in. The time increases 41us with each step in the timeout register which corresponds to 4096 clock cycles with the 99MHz clock that I have. Fixes: 06781a5026350 ("mtd: rawnand: gpmi: Fix setting busy timeout setting") Fixes: b1206122069aa ("mtd: rawniand: gpmi: use core timings instead of an empirical derivation") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer Acked-by: Han Xu Tested-by: Tomasz Moń Signed-off-by: Richard Weinberger Signed-off-by: Tim Harvey Signed-off-by: Greg Kroah-Hartman commit 8b1174d05896909369e02a98486419e03ce46129 Author: Maxim Levitsky Date: Tue Oct 25 15:47:31 2022 +0300 KVM: x86: emulator: update the emulation mode after CR0 write commit ad8f9e69942c7db90758d9d774157e53bce94840 upstream. Update the emulation mode when handling writes to CR0, because toggling CR0.PE switches between Real and Protected Mode, and toggling CR0.PG when EFER.LME=1 switches between Long and Protected Mode. This is likely a benign bug because there is no writeback of state, other than the RIP increment, and when toggling CR0.PE, the CPU has to execute code from a very low memory address. Signed-off-by: Maxim Levitsky Message-Id: <20221025124741.228045-14-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit ac3bc06c9ac504ca0b9ed1cd7a0f208cc637a7ae Author: Maxim Levitsky Date: Tue Oct 25 15:47:29 2022 +0300 KVM: x86: emulator: introduce emulator_recalc_and_set_mode commit d087e0f79fa0dd336a9a6b2f79ec23120f5eff73 upstream. Some instructions update the cpu execution mode, which needs to update the emulation mode. Extract this code, and make assign_eip_far use it. assign_eip_far now reads CS, instead of getting it via a parameter, which is ok, because callers always assign CS to the same value before calling this function. No functional change is intended. Signed-off-by: Maxim Levitsky Message-Id: <20221025124741.228045-12-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit f159cd915d73ffc75668976cb96197e87906751f Author: Maxim Levitsky Date: Tue Oct 25 15:47:28 2022 +0300 KVM: x86: emulator: em_sysexit should update ctxt->mode commit 5015bb89b58225f97df6ac44383e7e8c8662c8c9 upstream. SYSEXIT is one of the instructions that can change the processor mode, thus ctxt->mode should be updated after it. Note that this is likely a benign bug, because the only problematic mode change is from 32 bit to 64 bit which can lead to truncation of RIP, and it is not possible to do with sysexit, since sysexit running in 32 bit mode will be limited to 32 bit version. Signed-off-by: Maxim Levitsky Message-Id: <20221025124741.228045-11-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit ef3094c4e9eed3c801b514803b9d6fd612131d8a Author: Jim Mattson Date: Thu Sep 29 15:52:00 2022 -0700 KVM: x86: Mask off reserved bits in CPUID.80000008H commit 7030d8530e533844e2f4b0e7476498afcd324634 upstream. KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM actually supports. The following ranges of CPUID.80000008H are reserved and should be masked off: ECX[31:18] ECX[11:8] In addition, the PerfTscSize field at ECX[17:16] should also be zero because KVM does not set the PERFTSC bit at CPUID.80000001H.ECX[27]. Fixes: 24c82e576b78 ("KVM: Sanitize cpuid") Signed-off-by: Jim Mattson Message-Id: <20220929225203.2234702-3-jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit da1bf3732d0f82581a0455475935d2bca7fdcd86 Author: Jim Mattson Date: Thu Sep 29 15:52:01 2022 -0700 KVM: x86: Mask off reserved bits in CPUID.8000001AH commit 079f6889818dd07903fb36c252532ab47ebb6d48 upstream. KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM actually supports. In the case of CPUID.8000001AH, only three bits are currently defined. The 125 reserved bits should be masked off. Fixes: 24c82e576b78 ("KVM: Sanitize cpuid") Signed-off-by: Jim Mattson Message-Id: <20220929225203.2234702-4-jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 2fa24d0274fbf913b56ee31f15bc01168669d909 Author: Luís Henriques Date: Wed Oct 12 14:13:30 2022 +0100 ext4: fix BUG_ON() when directory entry has invalid rec_len commit 17a0bc9bd697f75cfdf9b378d5eb2d7409c91340 upstream. The rec_len field in the directory entry has to be a multiple of 4. A corrupted filesystem image can be used to hit a BUG() in ext4_rec_len_to_disk(), called from make_indexed_dir(). ------------[ cut here ]------------ kernel BUG at fs/ext4/ext4.h:2413! ... RIP: 0010:make_indexed_dir+0x53f/0x5f0 ... Call Trace: ? add_dirent_to_buf+0x1b2/0x200 ext4_add_entry+0x36e/0x480 ext4_add_nondir+0x2b/0xc0 ext4_create+0x163/0x200 path_openat+0x635/0xe90 do_filp_open+0xb4/0x160 ? __create_object.isra.0+0x1de/0x3b0 ? _raw_spin_unlock+0x12/0x30 do_sys_openat2+0x91/0x150 __x64_sys_open+0x6c/0xa0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The fix simply adds a call to ext4_check_dir_entry() to validate the directory entry, returning -EFSCORRUPTED if the entry is invalid. CC: stable@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=216540 Signed-off-by: Luís Henriques Link: https://lore.kernel.org/r/20221012131330.32456-1-lhenriques@suse.de Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 72743d5598b9096950bbfd6a9b7f173d156eea97 Author: Ye Bin Date: Tue Oct 18 10:27:01 2022 +0800 ext4: fix warning in 'ext4_da_release_space' commit 1b8f787ef547230a3249bcf897221ef0cc78481b upstream. Syzkaller report issue as follows: EXT4-fs (loop0): Free/Dirty block details EXT4-fs (loop0): free_blocks=0 EXT4-fs (loop0): dirty_blocks=0 EXT4-fs (loop0): Block reservation details EXT4-fs (loop0): i_reserved_data_blocks=0 EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks ------------[ cut here ]------------ WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524 Modules linked in: CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: writeback wb_workfn (flush-7:0) RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528 RSP: 0018:ffffc900015f6c90 EFLAGS: 00010296 RAX: 42215896cd52ea00 RBX: 0000000000000000 RCX: 42215896cd52ea00 RDX: 0000000000000000 RSI: 0000000080000001 RDI: 0000000000000000 RBP: 1ffff1100e907d96 R08: ffffffff816aa79d R09: fffff520002bece5 R10: fffff520002bece5 R11: 1ffff920002bece4 R12: ffff888021fd2000 R13: ffff88807483ecb0 R14: 0000000000000001 R15: ffff88807483e740 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555569ba628 CR3: 000000000c88e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461 mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589 ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852 do_writepages+0x3c3/0x680 mm/page-writeback.c:2469 __writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587 writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870 wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044 wb_do_writeback fs/fs-writeback.c:2187 [inline] wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 Above issue may happens as follows: ext4_da_write_begin ext4_create_inline_data ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); __ext4_ioctl ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag ext4_da_write_begin ext4_da_convert_inline_data_to_extent ext4_da_write_inline_data_begin ext4_da_map_blocks ext4_insert_delayed_block if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk)) ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1 allocated = true; ext4_es_insert_delayed_block(inode, lblk, allocated); ext4_writepages mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1 ext4_es_remove_extent ext4_da_release_space(inode, reserved); if (unlikely(to_free > ei->i_reserved_data_blocks)) -> to_free == 1 but ei->i_reserved_data_blocks == 0 -> then trigger warning as above To solve above issue, forbid inode do migrate which has inline data. Cc: stable@kernel.org Reported-by: syzbot+c740bb18df70ad00952e@syzkaller.appspotmail.com Signed-off-by: Ye Bin Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20221018022701.683489-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit eed040fd35e9228411fd04d90cd6be8b0e5729f0 Author: Helge Deller Date: Fri Oct 28 18:12:49 2022 +0200 parisc: Avoid printing the hardware path twice commit 2b6ae0962b421103feb41a80406732944b0665b3 upstream. Avoid that the hardware path is shown twice in the kernel log, and clean up the output of the version numbers to show up in the same order as they are listed in the hardware database in the hardware.c file. Additionally, optimize the memory footprint of the hardware database and mark some code as init code. Fixes: cab56b51ec0e ("parisc: Fix device names in /proc/iomem") Signed-off-by: Helge Deller Cc: # v4.9+ Signed-off-by: Greg Kroah-Hartman commit 9e902284ee3eb327d9c063111e63e3037b9b1764 Author: Helge Deller Date: Thu Oct 27 09:12:05 2022 +0200 parisc: Export iosapic_serial_irq() symbol for serial port driver commit a0c9f1f2e53b8eb2ae43987a30e547ba56b4fa18 upstream. The parisc serial port driver needs this symbol when it's compiled as module. Signed-off-by: Helge Deller Reported-by: kernel test robot Cc: Signed-off-by: Greg Kroah-Hartman commit 506ae301672e30113b2068efbbc3c1e8dabff69b Author: Helge Deller Date: Fri Oct 21 07:44:49 2022 +0200 parisc: Make 8250_gsc driver dependend on CONFIG_PARISC commit e8a18e3f00f3ee8d07c17ab1ea3ad4df4a3b6fe0 upstream. Although the name of the driver 8250_gsc.c suggests that it handles only serial ports on the GSC bus, it does handle serial ports listed in the parisc machine inventory as well, e.g. the serial ports in a C8000 PCI-only workstation. Change the dependency to CONFIG_PARISC, so that the driver gets included in the kernel even if CONFIG_GSC isn't set. Reported-by: Mikulas Patocka Cc: Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit c586068aad62908dc2af5ef596ded3e2347b6eaa Author: John Veness Date: Fri Jun 24 15:07:57 2022 +0100 ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices commit 6e2c9105e0b743c92a157389d40f00b81bdd09fe upstream. Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that the audio stream doesn't sound mono. Also fix initial stream alignment, so that left and right channels are in the correct order. Signed-off-by: John Veness Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 4e8ee3cf74e21a724ff0d1f2e9183d0483ef5fc1 Author: Kan Liang Date: Mon Oct 31 08:45:50 2022 -0700 perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[] commit 6f8faf471446844bb9c318e0340221049d5c19f4 upstream. The intel_pebs_isolation quirk checks both model number and stepping. Cooper Lake has a different stepping (11) than the other Skylake Xeon. It cannot benefit from the optimization in commit 9b545c04abd4f ("perf/x86/kvm: Avoid unnecessary work in guest filtering"). Add the stepping of Cooper Lake into the isolation_ucodes[] table. Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221031154550.571663-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 6ffa48150b9b45731602d7738e89559b5533b2ad Author: Kan Liang Date: Mon Oct 31 08:41:18 2022 -0700 perf/x86/intel: Fix pebs event constraints for ICL commit acc5568b90c19ac6375508a93b9676cd18a92a35 upstream. According to the latest event list, update the MEM_INST_RETIRED events which support the DataLA facility. Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support") Reported-by: Jannis Klinkenberg Signed-off-by: Kan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221031154119.571386-1-kan.liang@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit fee896d4534fddff9476c95e6f244b70f5772ec1 Author: Ard Biesheuvel Date: Thu Oct 20 10:39:08 2022 +0200 efi: random: reduce seed size to 32 bytes commit 161a438d730dade2ba2b1bf8785f0759aba4ca5f upstream. We no longer need at least 64 bytes of random seed to permit the early crng init to complete. The RNG is now based on Blake2s, so reduce the EFI seed size to the Blake2s hash size, which is sufficient for our purposes. While at it, drop the READ_ONCE(), which was supposed to prevent size from being evaluated after seed was unmapped. However, this cannot actually happen, so READ_ONCE() is unnecessary here. Cc: # v4.14+ Signed-off-by: Ard Biesheuvel Reviewed-by: Jason A. Donenfeld Acked-by: Ilias Apalodimas Signed-off-by: Greg Kroah-Hartman commit 0c72757434987de915860c0969f4ca48a1c74d51 Author: Miklos Szeredi Date: Fri Oct 28 14:25:20 2022 +0200 fuse: add file_modified() to fallocate commit 4a6f278d4827b59ba26ceae0ff4529ee826aa258 upstream. Add missing file_modified() call to fuse_file_fallocate(). Without this fallocate on fuse failed to clear privileges. Fixes: 05ba1f082300 ("fuse: add FALLOCATE operation") Cc: Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit 0c3e6288da650d1ec911a259c77bc2d88e498603 Author: Gaosheng Cui Date: Tue Oct 25 21:33:57 2022 +0800 capabilities: fix potential memleak on error path from vfs_getxattr_alloc() commit 8cf0a1bc12870d148ae830a4ba88cfdf0e879cee upstream. In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to complete the memory allocation of tmpbuf, if we have completed the memory allocation of tmpbuf, but failed to call handler->get(...), there will be a memleak in below logic: |-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...) | /* ^^^ alloc for tmpbuf */ |-- value = krealloc(*xattr_value, error + 1, flags) | /* ^^^ alloc memory */ |-- error = handler->get(handler, ...) | /* error! */ |-- *xattr_value = value | /* xattr_value is &tmpbuf (memory leak!) */ So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it. Cc: stable@vger.kernel.org Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities") Signed-off-by: Gaosheng Cui Acked-by: Serge Hallyn [PM: subject line and backtrace tweaks] Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 4bc52ddf6347c68209e4ee66bb2d19c544969a39 Author: Zheng Yejian Date: Mon Oct 17 10:38:06 2022 +0000 tracing/histogram: Update document for KEYS_MAX size commit a635beeacc6d56d2b71c39e6c0103f85b53d108e upstream. After commit 4f36c2d85ced ("tracing: Increase tracing map KEYS_MAX size"), 'keys' supports up to three fields. Signed-off-by: Zheng Yejian Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu (Google) Link: https://lore.kernel.org/r/20221017103806.2479139-1-zhengyejian1@huawei.com Signed-off-by: Jonathan Corbet Signed-off-by: Greg Kroah-Hartman commit c8938263e640a36f3dd6a336a3fe3768d26d41d7 Author: Rasmus Villemoes Date: Fri Oct 21 08:01:53 2022 +0200 tools/nolibc/string: Fix memcmp() implementation commit b3f4f51ea68a495f8a5956064c33dce711a2df91 upstream. The C standard says that memcmp() must treat the buffers as consisting of "unsigned chars". If char happens to be unsigned, the casts are ok, but then obviously the c1 variable can never contain a negative value. And when char is signed, the casts are wrong, and there's still a problem with using an 8-bit quantity to hold the difference, because that can range from -255 to +255. For example, assuming char is signed, comparing two 1-byte buffers, one containing 0x00 and another 0x80, the current implementation would return -128 for both memcmp(a, b, 1) and memcmp(b, a, 1), whereas one of those should of course return something positive. Signed-off-by: Rasmus Villemoes Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Willy Tarreau Signed-off-by: Paul E. McKenney Signed-off-by: Greg Kroah-Hartman commit 993bd0de8b5371c85de27623e9a271c77b6e330f Author: Li Qiang Date: Fri Nov 4 08:49:31 2022 +0900 kprobe: reverse kp->flags when arm_kprobe failed commit 4a6f316d6855a434f56dbbeba05e14c01acde8f8 upstream. In aggregate kprobe case, when arm_kprobe failed, we need set the kp->flags with KPROBE_FLAG_DISABLED again. If not, the 'kp' kprobe will been considered as enabled but it actually not enabled. Link: https://lore.kernel.org/all/20220902155820.34755-1-liq3ea@163.com/ Fixes: 12310e343755 ("kprobes: Propagate error from arm_kprobe_ftrace()") Cc: stable@vger.kernel.org Signed-off-by: Li Qiang Acked-by: Masami Hiramatsu (Google) Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Greg Kroah-Hartman commit fe3da74428bff06e04214d2478e505ab60987a99 Author: Kuniyuki Iwashima Date: Wed Jul 13 10:52:07 2022 -0700 tcp/udp: Make early_demux back namespacified. commit 11052589cf5c0bab3b4884d423d5f60c38fcf25d upstream. Commit e21145a9871a ("ipv4: namespacify ip_early_demux sysctl knob") made it possible to enable/disable early_demux on a per-netns basis. Then, we introduced two knobs, tcp_early_demux and udp_early_demux, to switch it for TCP/UDP in commit dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp"). However, the .proc_handler() was wrong and actually disabled us from changing the behaviour in each netns. We can execute early_demux if net.ipv4.ip_early_demux is on and each proto .early_demux() handler is not NULL. When we toggle (tcp|udp)_early_demux, the change itself is saved in each netns variable, but the .early_demux() handler is a global variable, so the handler is switched based on the init_net's sysctl variable. Thus, netns (tcp|udp)_early_demux knobs have nothing to do with the logic. Whether we CAN execute proto .early_demux() is always decided by init_net's sysctl knob, and whether we DO it or not is by each netns ip_early_demux knob. This patch namespacifies (tcp|udp)_early_demux again. For now, the users of the .early_demux() handler are TCP and UDP only, and they are called directly to avoid retpoline. So, we can remove the .early_demux() handler from inet6?_protos and need not dereference them in ip6?_rcv_finish_core(). If another proto needs .early_demux(), we can restore it at that time. Fixes: dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp") Signed-off-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20220713175207.7727-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4ae03c869c9aef4395b8f0c7799a9f8c7398565c Author: David Sterba Date: Tue Oct 18 16:05:52 2022 +0200 btrfs: fix type of parameter generation in btrfs_get_dentry commit 2398091f9c2c8e0040f4f9928666787a3e8108a7 upstream. The type of parameter generation has been u32 since the beginning, however all callers pass a u64 generation, so unify the types to prevent potential loss. CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Josef Bacik Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 27a594bc7a7c8238d239e3cdbcf2edfa3bbe9a1b Author: Carlos Llamas Date: Fri Nov 4 17:55:33 2022 +0000 binder: fix UAF of alloc->vma in race with munmap() In commit 720c24192404 ("ANDROID: binder: change down_write to down_read") binder assumed the mmap read lock is sufficient to protect alloc->vma inside binder_update_page_range(). This used to be accurate until commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"), which now downgrades the mmap_lock after detaching the vma from the rbtree in munmap(). Then it proceeds to teardown and free the vma with only the read lock held. This means that accesses to alloc->vma in binder_update_page_range() now will race with vm_area_free() in munmap() and can cause a UAF as shown in the following KASAN trace: ================================================================== BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0 Read of size 8 at addr ffff16204ad00600 by task server/558 CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x18/0x2c dump_stack+0xf8/0x164 print_address_description.constprop.0+0x9c/0x538 kasan_report+0x120/0x200 __asan_load8+0xa0/0xc4 vm_insert_page+0x7c/0x1f0 binder_update_page_range+0x278/0x50c binder_alloc_new_buf+0x3f0/0xba0 binder_transaction+0x64c/0x3040 binder_thread_write+0x924/0x2020 binder_ioctl+0x1610/0x2e5c __arm64_sys_ioctl+0xd4/0x120 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Allocated by task 559: kasan_save_stack+0x38/0x6c __kasan_kmalloc.constprop.0+0xe4/0xf0 kasan_slab_alloc+0x18/0x2c kmem_cache_alloc+0x1b0/0x2d0 vm_area_alloc+0x28/0x94 mmap_region+0x378/0x920 do_mmap+0x3f0/0x600 vm_mmap_pgoff+0x150/0x17c ksys_mmap_pgoff+0x284/0x2dc __arm64_sys_mmap+0x84/0xa4 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Freed by task 560: kasan_save_stack+0x38/0x6c kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x164 kasan_slab_free+0x14/0x20 kmem_cache_free+0xc4/0x34c vm_area_free+0x1c/0x2c remove_vma+0x7c/0x94 __do_munmap+0x358/0x710 __vm_munmap+0xbc/0x130 __arm64_sys_munmap+0x4c/0x64 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 [...] ================================================================== To prevent the race above, revert back to taking the mmap write lock inside binder_update_page_range(). One might expect an increase of mmap lock contention. However, binder already serializes these calls via top level alloc->mutex. Also, there was no performance impact shown when running the binder benchmark tests. Note this patch is specific to stable branches 5.4 and 5.10. Since in newer kernel releases binder no longer caches a pointer to the vma. Instead, it has been refactored to use vma_lookup() which avoids the issue described here. This switch was introduced in commit a43cfc87caaf ("android: binder: stop saving a pointer to the VMA"). Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn Cc: # 5.4.x Cc: Minchan Kim Cc: Yang Shi Cc: Liam Howlett Signed-off-by: Carlos Llamas Signed-off-by: Greg Kroah-Hartman commit bad83d55134e647a739ebef2082541963f2cbc92 Author: Vasily Averin Date: Thu Sep 2 14:55:31 2021 -0700 memcg: enable accounting of ipc resources commit 18319498fdd4cdf8c1c2c48cd432863b1f915d6f upstream. When user creates IPC objects it forces kernel to allocate memory for these long-living objects. It makes sense to account them to restrict the host's memory consumption from inside the memcg-limited container. This patch enables accounting for IPC shared memory segments, messages semaphores and semaphore's undo lists. Link: https://lkml.kernel.org/r/d6507b06-4df6-78f8-6c54-3ae86e3b5339@virtuozzo.com Signed-off-by: Vasily Averin Reviewed-by: Shakeel Butt Cc: Alexander Viro Cc: Alexey Dobriyan Cc: Andrei Vagin Cc: Borislav Petkov Cc: Borislav Petkov Cc: Christian Brauner Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: "Eric W. Biederman" Cc: Greg Kroah-Hartman Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: "J. Bruce Fields" Cc: Jeff Layton Cc: Jens Axboe Cc: Jiri Slaby Cc: Johannes Weiner Cc: Kirill Tkhai Cc: Michal Hocko Cc: Oleg Nesterov Cc: Roman Gushchin Cc: Serge Hallyn Cc: Tejun Heo Cc: Thomas Gleixner Cc: Vladimir Davydov Cc: Yutian Yang Cc: Zefan Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Luiz Capitulino Signed-off-by: Greg Kroah-Hartman commit 92aaa5e8fe90a008828a1207e66a30444bcb1cbd Author: Kuniyuki Iwashima Date: Thu Oct 6 11:53:45 2022 -0700 tcp/udp: Fix memory leak in ipv6_renew_options(). commit 3c52c6bb831f6335c176a0fc7214e26f43adbd11 upstream. syzbot reported a memory leak [0] related to IPV6_ADDRFORM. The scenario is that while one thread is converting an IPv6 socket into IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and allocates memory to inet6_sk(sk)->XXX after conversion. Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources, which inet6_destroy_sock() should have cleaned up. setsockopt(IPV6_ADDRFORM) setsockopt(IPV6_DSTOPTS) +-----------------------+ +----------------------+ - do_ipv6_setsockopt(sk, ...) - sockopt_lock_sock(sk) - do_ipv6_setsockopt(sk, ...) - lock_sock(sk) ^._ called via tcpv6_prot - WRITE_ONCE(sk->sk_prot, &tcp_prot) before WRITE_ONCE() - xchg(&np->opt, NULL) - txopt_put(opt) - sockopt_release_sock(sk) - release_sock(sk) - sockopt_lock_sock(sk) - lock_sock(sk) - ipv6_set_opt_hdr(sk, ...) - ipv6_update_options(sk, opt) - xchg(&inet6_sk(sk)->opt, opt) ^._ opt is never freed. - sockopt_release_sock(sk) - release_sock(sk) Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after acquiring the lock. This issue exists from the initial commit between IPV6_ADDRFORM and IPV6_PKTOPTIONS. [0]: BUG: memory leak unreferenced object 0xffff888009ab9f80 (size 96): comm "syz-executor583", pid 328, jiffies 4294916198 (age 13.034s) hex dump (first 32 bytes): 01 00 00 00 48 00 00 00 08 00 00 00 00 00 00 00 ....H........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002ee98ae1>] kmalloc include/linux/slab.h:605 [inline] [<000000002ee98ae1>] sock_kmalloc+0xb3/0x100 net/core/sock.c:2566 [<0000000065d7b698>] ipv6_renew_options+0x21e/0x10b0 net/ipv6/exthdrs.c:1318 [<00000000a8c756d7>] ipv6_set_opt_hdr net/ipv6/ipv6_sockglue.c:354 [inline] [<00000000a8c756d7>] do_ipv6_setsockopt.constprop.0+0x28b7/0x4350 net/ipv6/ipv6_sockglue.c:668 [<000000002854d204>] ipv6_setsockopt+0xdf/0x190 net/ipv6/ipv6_sockglue.c:1021 [<00000000e69fdcf8>] tcp_setsockopt+0x13b/0x2620 net/ipv4/tcp.c:3789 [<0000000090da4b9b>] __sys_setsockopt+0x239/0x620 net/socket.c:2252 [<00000000b10d192f>] __do_sys_setsockopt net/socket.c:2263 [inline] [<00000000b10d192f>] __se_sys_setsockopt net/socket.c:2260 [inline] [<00000000b10d192f>] __x64_sys_setsockopt+0xbe/0x160 net/socket.c:2260 [<000000000a80d7aa>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<000000000a80d7aa>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<000000004562b5c6>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Kuniyuki Iwashima Signed-off-by: Jakub Kicinski Signed-off-by: Meena Shanmugam Signed-off-by: Greg Kroah-Hartman commit c494ae149858b07d6df7614445961d34c82e461f Author: Yu Kuai Date: Fri May 13 10:35:06 2022 +0800 block, bfq: protect 'bfqd->queued' by 'bfqd->lock' commit 181490d5321806e537dc5386db5ea640b826bf78 upstream. If bfq_schedule_dispatch() is called from bfq_idle_slice_timer_body(), then 'bfqd->queued' is read without holding 'bfqd->lock'. This is wrong since it can be wrote concurrently. Fix the problem by holding 'bfqd->lock' in such case. Signed-off-by: Yu Kuai Reviewed-by: Jan Kara Reviewed-by: Chaitanya Kulkarni Link: https://lore.kernel.org/r/20220513023507.2625717-2-yukuai3@huawei.com Signed-off-by: Jens Axboe Cc: Khazhy Kumykov Signed-off-by: Greg Kroah-Hartman commit 6949400ec9feca7f88c0f6ca5cb5fdbcef419c89 Author: Luiz Augusto von Dentz Date: Mon Oct 31 16:10:52 2022 -0700 Bluetooth: L2CAP: Fix attempting to access uninitialized memory commit b1a2cd50c0357f243b7435a732b4e62ba3157a2e upstream. On l2cap_parse_conf_req the variable efs is only initialized if remote_efs has been set. CVE: CVE-2022-42895 CC: stable@vger.kernel.org Reported-by: Tamás Koczka Signed-off-by: Luiz Augusto von Dentz Reviewed-by: Tedd Ho-Jeong An Signed-off-by: Greg Kroah-Hartman commit ad18f624e3da9d7909b0d8ef2129bad594d06a9b Author: Chuhong Yuan Date: Mon Nov 7 09:33:27 2022 +0530 xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster() commit 8cc0072469723459dc6bd7beff81b2b3149f4cf4 upstream. xfs_ifree_cluster() calls xfs_perag_get() at the beginning, but forgets to call xfs_perag_put() in one failed path. Add the missed function call to fix it. Fixes: ce92464c180b ("xfs: make xfs_trans_get_buf return an error code") Signed-off-by: Chuhong Yuan Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit 0802130a4d0b30806b0f6f17753188847876a115 Author: Darrick J. Wong Date: Mon Nov 7 09:33:26 2022 +0530 xfs: don't fail unwritten extent conversion on writeback due to edquot commit 1edd2c055dff9710b1e29d4df01902abb0a55f1f upstream. During writeback, it's possible for the quota block reservation in xfs_iomap_write_unwritten to fail with EDQUOT because we hit the quota limit. This causes writeback errors for data that was already written to disk, when it's not even guaranteed that the bmbt will expand to exceed the quota limit. Irritatingly, this condition is reported to userspace as EIO by fsync, which is confusing. We wrote the data, so allow the reservation. That might put us slightly above the hard limit, but it's better than losing data after a write. Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit fef141f9e4c140faceca6aff7b3791e7704a531b Author: Eric Sandeen Date: Mon Nov 7 09:33:25 2022 +0530 xfs: group quota should return EDQUOT when prj quota enabled commit c8d329f311c4d3d8f8e6dc5897ec235e37f48ae8 upstream. Long ago, group & project quota were mutually exclusive, and so when we turned on XFS_QMOPT_ENOSPC ("return ENOSPC if project quota is exceeded") when project quota was enabled, we only needed to disable it again for user quota. When group & project quota got separated, this got missed, and as a result if project quota is enabled and group quota is exceeded, the error code returned is incorrectly returned as ENOSPC not EDQUOT. Fix this by stripping XFS_QMOPT_ENOSPC out of flags for group quota when we try to reserve the space. Signed-off-by: Eric Sandeen Reviewed-by: Christoph Hellwig Reviewed-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit 4267433dd3d3a57518392a15abf01eeac2769a89 Author: Dave Chinner Date: Mon Nov 7 09:33:24 2022 +0530 xfs: gut error handling in xfs_trans_unreserve_and_mod_sb() commit dc3ffbb14060c943469d5e12900db3a60bc3fa64 upstream. The error handling in xfs_trans_unreserve_and_mod_sb() is largely incorrect - rolling back the changes in the transaction if only one counter underruns makes all the other counters incorrect. We still allow the change to proceed and committing the transaction, except now we have multiple incorrect counters instead of a single underflow. Further, we don't actually report the error to the caller, so this is completely silent except on debug kernels that will assert on failure before we even get to the rollback code. Hence this error handling is broken, untested, and largely unnecessary complexity. Just remove it. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit 24e7e3935309bae804f917c5bb4a3467c2f8e026 Author: Darrick J. Wong Date: Mon Nov 7 09:33:23 2022 +0530 xfs: use ordered buffers to initialize dquot buffers during quotacheck commit 78bba5c812cc651cee51b64b786be926ab7fe2a9 upstream. While QAing the new xfs_repair quotacheck code, I uncovered a quota corruption bug resulting from a bad interaction between dquot buffer initialization and quotacheck. The bug can be reproduced with the following sequence: # mkfs.xfs -f /dev/sdf # mount /dev/sdf /opt -o usrquota # su nobody -s /bin/bash -c 'touch /opt/barf' # sync # xfs_quota -x -c 'report -ahi' /opt User quota on /opt (/dev/sdf) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 3 0 0 00 [------] nobody 1 0 0 00 [------] # xfs_io -x -c 'shutdown' /opt # umount /opt # mount /dev/sdf /opt -o usrquota # touch /opt/man2 # xfs_quota -x -c 'report -ahi' /opt User quota on /opt (/dev/sdf) Inodes User ID Used Soft Hard Warn/Grace ---------- --------------------------------- root 1 0 0 00 [------] nobody 1 0 0 00 [------] # umount /opt Notice how the initial quotacheck set the root dquot icount to 3 (rootino, rbmino, rsumino), but after shutdown -> remount -> recovery, xfs_quota reports that the root dquot has only 1 icount. We haven't deleted anything from the filesystem, which means that quota is now under-counting. This behavior is not limited to icount or the root dquot, but this is the shortest reproducer. I traced the cause of this discrepancy to the way that we handle ondisk dquot updates during quotacheck vs. regular fs activity. Normally, when we allocate a disk block for a dquot, we log the buffer as a regular (dquot) buffer. Subsequent updates to the dquots backed by that block are done via separate dquot log item updates, which means that they depend on the logged buffer update being written to disk before the dquot items. Because individual dquots have their own LSN fields, that initial dquot buffer must always be recovered. However, the story changes for quotacheck, which can cause dquot block allocations but persists the final dquot counter values via a delwri list. Because recovery doesn't gate dquot buffer replay on an LSN, this means that the initial dquot buffer can be replayed over the (newer) contents that were delwritten at the end of quotacheck. In effect, this re-initializes the dquot counters after they've been updated. If the log does not contain any other dquot items to recover, the obsolete dquot contents will not be corrected by log recovery. Because quotacheck uses a transaction to log the setting of the CHKD flags in the superblock, we skip quotacheck during the second mount call, which allows the incorrect icount to remain. Fix this by changing the ondisk dquot initialization function to use ordered buffers to write out fresh dquot blocks if it detects that we're running quotacheck. If the system goes down before quotacheck can complete, the CHKD flags will not be set in the superblock and the next mount will run quotacheck again, which can fix uninitialized dquot buffers. This requires amending the defer code to maintaine ordered buffer state across defer rolls for the sake of the dquot allocation code. For regular operations we preserve the current behavior since the dquot items require properly initialized ondisk dquot records. Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit 52802e9a035fb10ec9e06ebd4e570f7ad0e66173 Author: Brian Foster Date: Mon Nov 7 09:33:22 2022 +0530 xfs: don't fail verifier on empty attr3 leaf block commit f28cef9e4daca11337cb9f144cdebedaab69d78c upstream. The attr fork can transition from shortform to leaf format while empty if the first xattr doesn't fit in shortform. While this empty leaf block state is intended to be transient, it is technically not due to the transactional implementation of the xattr set operation. We historically have a couple of bandaids to work around this problem. The first is to hold the buffer after the format conversion to prevent premature writeback of the empty leaf buffer and the second is to bypass the xattr count check in the verifier during recovery. The latter assumes that the xattr set is also in the log and will be recovered into the buffer soon after the empty leaf buffer is reconstructed. This is not guaranteed, however. If the filesystem crashes after the format conversion but before the xattr set that induced it, only the format conversion may exist in the log. When recovered, this creates a latent corrupted state on the inode as any subsequent attempts to read the buffer fail due to verifier failure. This includes further attempts to set xattrs on the inode or attempts to destroy the attr fork, which prevents the inode from ever being removed from the unlinked list. To avoid this condition, accept that an empty attr leaf block is a valid state and remove the count check from the verifier. This means that on rare occasions an attr fork might exist in an unexpected state, but is otherwise consistent and functional. Note that we retain the logic to avoid racing with metadata writeback to reduce the window where this can occur. Signed-off-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit 71d487a82d2ce99d23a7c097179932e5723f4847 Author: Martin Tůma Date: Tue Oct 18 16:03:37 2022 +0200 i2c: xiic: Add platform module alias [ Upstream commit b8caf0a0e04583fb71e21495bef84509182227ea ] The missing "platform" alias is required for the mgb4 v4l2 driver to load the i2c controller driver when probing the HW. Signed-off-by: Martin Tůma Acked-by: Michal Simek Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit cdd19e559a72151c0a02fa02fb58960f630a2b5f Author: Samuel Bailey Date: Wed Oct 5 19:51:23 2022 +0100 HID: saitek: add madcatz variant of MMO7 mouse device ID [ Upstream commit 79425b297f56bd481c6e97700a9a4e44c7bcfa35 ] The MadCatz variant of the MMO7 mouse has the ID 0738:1713 and the same quirks as the Saitek variant. Signed-off-by: Samuel Bailey Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit efdcd1e32c0d097732b0605826426807ac01cc87 Author: Uday Shankar Date: Fri Sep 23 18:02:42 2022 -0600 scsi: core: Restrict legal sdev_state transitions via sysfs [ Upstream commit 2331ce6126be8864b39490e705286b66e2344aac ] Userspace can currently write to sysfs to transition sdev_state to RUNNING or OFFLINE from any source state. This causes issues because proper transitioning out of some states involves steps besides just changing sdev_state, so allowing userspace to change sdev_state regardless of the source state can result in inconsistencies; e.g. with ISCSI we can end up with sdev_state == SDEV_RUNNING while the device queue is quiesced. Any task attempting I/O on the device will then hang, and in more recent kernels, iscsid will hang as well. More detail about this bug is provided in my first attempt: https://groups.google.com/g/open-iscsi/c/PNKca4HgPDs/m/CXaDkntOAQAJ Link: https://lore.kernel.org/r/20220924000241.2967323-1-ushankar@purestorage.com Signed-off-by: Uday Shankar Suggested-by: Mike Christie Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 70119756311a0be3b95bec2e1ba714673e90feba Author: Hangyu Hua Date: Tue Sep 6 09:46:30 2022 +0200 media: meson: vdec: fix possible refcount leak in vdec_probe() [ Upstream commit 7718999356234d9cc6a11b4641bb773928f1390f ] v4l2_device_unregister need to be called to put the refcount got by v4l2_device_register when vdec_probe fails or vdec_remove is called. Signed-off-by: Hangyu Hua Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit bfa8ccf7059763a9335cce11819e947777034045 Author: Hans Verkuil Date: Tue Aug 30 07:59:24 2022 +0200 media: dvb-frontends/drxk: initialize err to 0 [ Upstream commit 20694e96ca089ce6693c2348f8f628ee621e4e74 ] Fix a compiler warning: drivers/media/dvb-frontends/drxk_hard.c: In function 'drxk_read_ucblocks': drivers/media/dvb-frontends/drxk_hard.c:6673:21: warning: 'err' may be used uninitialized [-Wmaybe-uninitialized] 6673 | *ucblocks = (u32) err; | ^~~~~~~~~ drivers/media/dvb-frontends/drxk_hard.c:6663:13: note: 'err' was declared here 6663 | u16 err; | ^~~ Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 11c8f19e0f5a298aa3233b119b41719325258868 Author: Hans Verkuil Date: Wed Aug 24 09:06:19 2022 +0200 media: cros-ec-cec: limit msg.len to CEC_MAX_MSG_SIZE [ Upstream commit 2dc73b48665411a08c4e5f0f823dea8510761603 ] I expect that the hardware will have limited this to 16, but just in case it hasn't, check for this corner case. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 4a449430ecfb199b99ba58af63c467eb53500b39 Author: Hans Verkuil Date: Wed Aug 24 09:02:42 2022 +0200 media: s5p_cec: limit msg.len to CEC_MAX_MSG_SIZE [ Upstream commit 93f65ce036863893c164ca410938e0968964b26c ] I expect that the hardware will have limited this to 16, but just in case it hasn't, check for this corner case. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 381453770f731f0f43616a1cd4c759b7807a1517 Author: Zhengchao Shao Date: Wed Nov 2 10:06:10 2022 +0800 ipv6: fix WARNING in ip6_route_net_exit_late() [ Upstream commit 768b3c745fe5789f2430bdab02f35a9ad1148d97 ] During the initialization of ip6_route_net_init_late(), if file ipv6_route or rt6_stats fails to be created, the initialization is successful by default. Therefore, the ipv6_route or rt6_stats file doesn't be found during the remove in ip6_route_net_exit_late(). It will cause WRNING. The following is the stack information: name 'rt6_stats' WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 PKRU: 55555554 Call Trace: ops_exit_list+0xb0/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Fixes: cdb1876192db ("[NETNS][IPV6] route6 - create route6 proc files for the namespace") Signed-off-by: Zhengchao Shao Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit b49f6b2f21f543d4dc88fb7b1ec2adccb822f27c Author: Chen Zhongjin Date: Tue Nov 1 20:15:52 2022 +0800 net, neigh: Fix null-ptr-deref in neigh_table_clear() [ Upstream commit f8017317cb0b279b8ab98b0f3901a2e0ac880dad ] When IPv6 module gets initialized but hits an error in the middle, kenel panic with: KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f] CPU: 1 PID: 361 Comm: insmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370 RSP: 0018:ffff888012677908 EFLAGS: 00000202 ... Call Trace: neigh_table_clear+0x94/0x2d0 ndisc_cleanup+0x27/0x40 [ipv6] inet6_init+0x21c/0x2cb [ipv6] do_one_initcall+0xd3/0x4d0 do_init_module+0x1ae/0x670 ... Kernel panic - not syncing: Fatal exception When ipv6 initialization fails, it will try to cleanup and calls: neigh_table_clear() neigh_ifdown(tbl, NULL) pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL)) # dev_net(NULL) triggers null-ptr-deref. Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev is NULL, to make kernel not panic immediately. Fixes: 66ba215cb513 ("neigh: fix possible DoS due to net iface start/stop loop") Signed-off-by: Chen Zhongjin Reviewed-by: Eric Dumazet Reviewed-by: Denis V. Lunev Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4954b5359eb141499492fadfab891e28905509e2 Author: Gaosheng Cui Date: Mon Oct 31 21:26:45 2022 +0800 net: mdio: fix undefined behavior in bit shift for __mdiobus_register [ Upstream commit 40e4eb324c59e11fcb927aa46742d28aba6ecb8a ] Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c __mdiobus_register+0x49d/0x4e0 fixed_mdio_bus_init+0xd8/0x12d do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus") Signed-off-by: Gaosheng Cui Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c1f594dddd9ffd747c39f49cc5b67a9b7677d2ab Author: Zhengchao Shao Date: Mon Oct 17 15:58:13 2022 +0800 Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del() [ Upstream commit 0d0e2d032811280b927650ff3c15fe5020e82533 ] When l2cap_recv_frame() is invoked to receive data, and the cid is L2CAP_CID_A2MP, if the channel does not exist, it will create a channel. However, after a channel is created, the hold operation of the channel is not performed. In this case, the value of channel reference counting is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del() invokes the close hook function of A2MP to release the channel. Then l2cap_chan_unlock(chan) will trigger UAF issue. The process is as follows: Receive data: l2cap_data_channel() a2mp_channel_create() --->channel ref is 2 l2cap_chan_put() --->channel ref is 1 Triger event: hci_error_reset() hci_dev_do_close() ... l2cap_disconn_cfm() l2cap_conn_del() l2cap_chan_hold() --->channel ref is 2 l2cap_chan_del() --->channel ref is 1 a2mp_chan_close_cb() --->channel ref is 0, release channel l2cap_chan_unlock() --->UAF of channel The detailed Call Trace is as follows: BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0 Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593 Workqueue: hci0 hci_error_reset Call Trace: dump_stack_lvl+0xcd/0x134 print_report.cold+0x2ba/0x719 kasan_report+0xb1/0x1e0 kasan_check_range+0x140/0x190 __mutex_unlock_slowpath+0xa6/0x5e0 l2cap_conn_del+0x404/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Allocated by task 7593: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0xa9/0xd0 l2cap_chan_create+0x40/0x930 amp_mgr_create+0x96/0x990 a2mp_channel_create+0x7d/0x150 l2cap_recv_frame+0x51b8/0x9a70 l2cap_recv_acldata+0xaa3/0xc00 hci_rx_work+0x702/0x1220 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Freed by task 7593: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x167/0x1c0 slab_free_freelist_hook+0x89/0x1c0 kfree+0xe2/0x580 l2cap_chan_put+0x22a/0x2d0 l2cap_conn_del+0x3fc/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put") Signed-off-by: Zhengchao Shao Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 4cd094fd5d872862ca278e15b9b51b07e915ef3f Author: Maxim Mikityanskiy Date: Wed Oct 5 00:27:18 2022 +0300 Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu [ Upstream commit 3aff8aaca4e36dc8b17eaa011684881a80238966 ] Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u Fixes: d2a7ac5d5d3a ("Bluetooth: Add the ERTM receive state machine") Fixes: 4b51dae96731 ("Bluetooth: Add streaming mode receive and incoming packet classifier") Signed-off-by: Maxim Mikityanskiy Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 5d1a47ebf84540e40b5b43fc21aef0d6c0f627d9 Author: Filipe Manana Date: Tue Nov 1 16:15:39 2022 +0000 btrfs: fix ulist leaks in error paths of qgroup self tests [ Upstream commit d37de92b38932d40e4a251e876cc388f9aee5f42 ] In the test_no_shared_qgroup() and test_multiple_refs() qgroup self tests, if we fail to add the tree ref, remove the extent item or remove the extent ref, we are returning from the test function without freeing the "old_roots" ulist that was allocated by the previous calls to btrfs_find_all_roots(). Fix that by calling ulist_free() before returning. Fixes: 442244c96332 ("btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.") Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 6a6731a0df8c47ecc703bd7bb73459df767051e0 Author: Filipe Manana Date: Tue Nov 1 16:15:38 2022 +0000 btrfs: fix inode list leak during backref walking at find_parent_nodes() [ Upstream commit 92876eec382a0f19f33d09d2c939e9ca49038ae5 ] During backref walking, at find_parent_nodes(), if we are dealing with a data extent and we get an error while resolving the indirect backrefs, at resolve_indirect_refs(), or in the while loop that iterates over the refs in the direct refs rbtree, we end up leaking the inode lists attached to the direct refs we have in the direct refs rbtree that were not yet added to the refs ulist passed as argument to find_parent_nodes(). Since they were not yet added to the refs ulist and prelim_release() does not free the lists, on error the caller can only free the lists attached to the refs that were added to the refs ulist, all the remaining refs get their inode lists never freed, therefore leaking their memory. Fix this by having prelim_release() always free any attached inode list to each ref found in the rbtree, and have find_parent_nodes() set the ref's inode list to NULL once it transfers ownership of the inode list to a ref added to the refs ulist passed to find_parent_nodes(). Fixes: 86d5f9944252 ("btrfs: convert prelimary reference tracking to use rbtrees") Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 2c0329406bb28109c07c6e23e5e3e0fa618a95d7 Author: Filipe Manana Date: Tue Nov 1 16:15:37 2022 +0000 btrfs: fix inode list leak during backref walking at resolve_indirect_refs() [ Upstream commit 5614dc3a47e3310fbc77ea3b67eaadd1c6417bf1 ] During backref walking, at resolve_indirect_refs(), if we get an error we jump to the 'out' label and call ulist_free() on the 'parents' ulist, which frees all the elements in the ulist - however that does not free any inode lists that may be attached to elements, through the 'aux' field of a ulist node, so we end up leaking lists if we have any attached to the unodes. Fix this by calling free_leaf_list() instead of ulist_free() when we exit from resolve_indirect_refs(). The static function free_leaf_list() is moved up for this to be possible and it's slightly simplified by removing unnecessary code. Fixes: 3301958b7c1d ("Btrfs: add inodes before dropping the extent lock in find_all_leafs") Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 3d74329d8cff9d944aa999a9a642c713ae51b036 Author: Yang Yingliang Date: Mon Oct 31 20:13:41 2022 +0800 isdn: mISDN: netjet: fix wrong check of device registration [ Upstream commit bf00f5426074249058a106a6edbb89e4b25a4d79 ] The class is set in mISDN_register_device(), but if device_add() returns error, it will lead to delete a device without added, fix this by using device_is_registered() to check if the device is registered. Fixes: a900845e5661 ("mISDN: Add support for Traverse Technologies NETJet PCI cards") Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 2ff6b669523d3b3d253a044fa9636a67d0694995 Author: Yang Yingliang Date: Mon Oct 31 20:13:40 2022 +0800 mISDN: fix possible memory leak in mISDN_register_device() [ Upstream commit e7d1d4d9ac0dfa40be4c2c8abd0731659869b297 ] Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, add put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. Set device class before put_device() to avoid null release() function WARN message in device_release(). Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b13be5e852b03f376058027e462fad4230240891 Author: Zhang Qilong Date: Sat Oct 29 00:10:49 2022 +0800 rose: Fix NULL pointer dereference in rose_send_frame() [ Upstream commit e97c089d7a49f67027395ddf70bf327eeac2611e ] The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c) Fixes: 3c53cd65dece ("rose: check NULL rose_loopback_neigh->loopback") Signed-off-by: Zhang Qilong Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 8457a00c981fe1a799ce34123908856b0f5973b8 Author: Zhengchao Shao Date: Mon Oct 31 20:07:05 2022 +0800 ipvs: fix WARNING in ip_vs_app_net_cleanup() [ Upstream commit 5663ed63adb9619c98ab7479aa4606fa9b7a548c ] During the initialization of ip_vs_app_net_init(), if file ip_vs_app fails to be created, the initialization is successful by default. Therefore, the ip_vs_app file doesn't be found during the remove in ip_vs_app_net_cleanup(). It will cause WRNING. The following is the stack information: name 'ip_vs_app' WARNING: CPU: 1 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 Call Trace: ops_exit_list+0x125/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Fixes: 457c4cbc5a3d ("[NET]: Make /proc/net per network namespace") Signed-off-by: Zhengchao Shao Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 7effc4ce3d1434ce6ff286866585a6e905fdbfc1 Author: Zhengchao Shao Date: Mon Oct 31 20:07:04 2022 +0800 ipvs: fix WARNING in __ip_vs_cleanup_batch() [ Upstream commit 3d00c6a0da8ddcf75213e004765e4a42acc71d5d ] During the initialization of ip_vs_conn_net_init(), if file ip_vs_conn or ip_vs_conn_sync fails to be created, the initialization is successful by default. Therefore, the ip_vs_conn or ip_vs_conn_sync file doesn't be found during the remove. The following is the stack information: name 'ip_vs_conn_sync' WARNING: CPU: 3 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 Call Trace: __ip_vs_cleanup_batch+0x7d/0x120 ops_exit_list+0x125/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Fixes: 61b1ab4583e2 ("IPVS: netns, add basic init per netns.") Signed-off-by: Zhengchao Shao Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 2cc523978f1c7dbfb1ad046025aa624167bf7a36 Author: Jason A. Donenfeld Date: Wed Oct 26 14:32:16 2022 +0200 ipvs: use explicitly signed chars [ Upstream commit 5c26159c97b324dc5174a5713eafb8c855cf8106 ] The `char` type with no explicit sign is sometimes signed and sometimes unsigned. This code will break on platforms such as arm, where char is unsigned. So mark it here as explicitly signed, so that the todrop_counter decrement and subsequent comparison is correct. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jason A. Donenfeld Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 74fd5839467054cd9c4d050614d3ee8788386171 Author: Pablo Neira Ayuso Date: Wed Oct 26 09:54:45 2022 +0200 netfilter: nf_tables: release flow rule object from commit path [ Upstream commit 26b5934ff4194e13196bedcba373cd4915071d0e ] No need to postpone this to the commit release path, since no packets are walking over this object, this is accessed from control plane only. This helped uncovered UAF triggered by races with the netlink notifier. Fixes: 9dd732e0bdf5 ("netfilter: nf_tables: memleak flow rule from commit path") Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit ca791952d42c5b40d548ff6c4a879216039b0ca1 Author: Ziyang Xuan Date: Sat Oct 29 17:41:01 2022 +0800 net: tun: fix bugs for oversize packet when napi frags enabled [ Upstream commit 363a5328f4b0517e59572118ccfb7c626d81dca9 ] Recently, we got two syzkaller problems because of oversize packet when napi frags enabled. One of the problems is because the first seg size of the iov_iter from user space is very big, it is 2147479538 which is bigger than the threshold value for bail out early in __alloc_pages(). And skb->pfmemalloc is true, __kmalloc_reserve() would use pfmemalloc reserves without __GFP_NOWARN flag. Thus we got a warning as following: ======================================================== WARNING: CPU: 1 PID: 17965 at mm/page_alloc.c:5295 __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295 ... Call trace: __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295 __alloc_pages_node include/linux/gfp.h:550 [inline] alloc_pages_node include/linux/gfp.h:564 [inline] kmalloc_large_node+0x94/0x350 mm/slub.c:4038 __kmalloc_node_track_caller+0x620/0x8e4 mm/slub.c:4545 __kmalloc_reserve.constprop.0+0x1e4/0x2b0 net/core/skbuff.c:151 pskb_expand_head+0x130/0x8b0 net/core/skbuff.c:1654 __skb_grow include/linux/skbuff.h:2779 [inline] tun_napi_alloc_frags+0x144/0x610 drivers/net/tun.c:1477 tun_get_user+0x31c/0x2010 drivers/net/tun.c:1835 tun_chr_write_iter+0x98/0x100 drivers/net/tun.c:2036 The other problem is because odd IPv6 packets without NEXTHDR_NONE extension header and have big packet length, it is 2127925 which is bigger than ETH_MAX_MTU(65535). After ipv6_gso_pull_exthdrs() in ipv6_gro_receive(), network_header offset and transport_header offset are all bigger than U16_MAX. That would trigger skb->network_header and skb->transport_header overflow error, because they are all '__u16' type. Eventually, it would affect the value for __skb_push(skb, value), and make it be a big value. After __skb_push() in ipv6_gro_receive(), skb->data would less than skb->head, an out of bounds memory bug occurred. That would trigger the problem as following: ================================================================== BUG: KASAN: use-after-free in eth_type_trans+0x100/0x260 ... Call trace: dump_backtrace+0xd8/0x130 show_stack+0x1c/0x50 dump_stack_lvl+0x64/0x7c print_address_description.constprop.0+0xbc/0x2e8 print_report+0x100/0x1e4 kasan_report+0x80/0x120 __asan_load8+0x78/0xa0 eth_type_trans+0x100/0x260 napi_gro_frags+0x164/0x550 tun_get_user+0xda4/0x1270 tun_chr_write_iter+0x74/0x130 do_iter_readv_writev+0x130/0x1ec do_iter_write+0xbc/0x1e0 vfs_writev+0x13c/0x26c To fix the problems, restrict the packet size less than (ETH_MAX_MTU - NET_SKB_PAD - NET_IP_ALIGN) which has considered reserved skb space in napi_alloc_skb() because transport_header is an offset from skb->head. Add len check in tun_napi_alloc_frags() simply. Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Ziyang Xuan Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20221029094101.1653855-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 52e0429471976785c155bfbf51d80990c6cd46e2 Author: Dan Carpenter Date: Fri Oct 28 18:05:00 2022 +0300 net: sched: Fix use after free in red_enqueue() [ Upstream commit 8bdc2acd420c6f3dd1f1c78750ec989f02a1e2b9 ] We can't use "skb" again after passing it to qdisc_enqueue(). This is basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb len before calling child enqueue"). Fixes: d7f4f332f082 ("sch_red: update backlog as well") Signed-off-by: Dan Carpenter Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit d605da3e5f7486a09de901b9a9091f60964684b0 Author: Sergey Shtylyov Date: Sat Oct 29 00:07:06 2022 +0300 ata: pata_legacy: fix pdc20230_set_piomode() [ Upstream commit 171a93182eccd6e6835d2c86b40787f9f832efaa ] Clang gives a warning when compiling pata_legacy.c with 'make W=1' about the 'rt' local variable in pdc20230_set_piomode() being set but unused. Quite obviously, there is an outb() call missing to write back the updated variable. Moreover, checking the docs by Petr Soucek revealed that bitwise AND should have been done with a negated timing mask and the master/slave timing masks were swapped while updating... Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Reported-by: Damien Le Moal Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit 704b92c51b6403e9f41445a4bdfdc21acf9df555 Author: Zhang Changzhong Date: Fri Oct 28 10:09:11 2022 +0800 net: fec: fix improper use of NETDEV_TX_BUSY [ Upstream commit 06a4df5863f73af193a4ff7abf7cb04058584f06 ] The ndo_start_xmit() method must not free skb when returning NETDEV_TX_BUSY, since caller is going to requeue freed skb. Fix it by returning NETDEV_TX_OK in case of dma_map_single() fails. Fixes: 79f339125ea3 ("net: fec: Add software TSO support") Signed-off-by: Zhang Changzhong Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f30060efcf18883748a0541aa41acef183cd9c0e Author: Shang XiaoJing Date: Thu Oct 27 22:03:32 2022 +0800 nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send() [ Upstream commit 93d904a734a74c54d945a9884b4962977f1176cd ] nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() will only free skb when i2c_master_send() return >=0, which means skb will memleak when i2c_master_send() failed. Free skb no matter whether i2c_master_send() succeeds. Fixes: b5b3e23e4cac ("NFC: nfcmrvl: add i2c driver") Signed-off-by: Shang XiaoJing Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit aef89b91c7d75778cfa53ba287aa025603ca640a Author: Shang XiaoJing Date: Thu Oct 27 22:03:31 2022 +0800 nfc: s3fwrn5: Fix potential memory leak in s3fwrn5_nci_send() [ Upstream commit 3a146b7e3099dc7cf3114f627d9b79291e2d2203 ] s3fwrn5_nci_send() will call s3fwrn5_i2c_write() or s3fwrn82_uart_write(), and free the skb if write() failed. However, even if the write() run succeeds, the skb will not be freed in write(). As the result, the skb will memleak. s3fwrn5_nci_send() should also free the skb when write() succeeds. Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by: Shang XiaoJing Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 875082ae832972e3422ae39ddfa8596550d5a6fa Author: Dan Carpenter Date: Tue Oct 25 18:32:32 2022 +0300 RDMA/qedr: clean up work queue on failure in qedr_alloc_resources() [ Upstream commit 7a47e077e503feb73d56e491ce89aa73b67a3972 ] Add a check for if create_singlethread_workqueue() fails and also destroy the work queue on failure paths. Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/Y1gBkDucQhhWj5YM@kili Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit af8fb5a0600e9ae29950e9422a032c3c22649ee5 Author: Chen Zhongjin Date: Tue Oct 25 10:41:46 2022 +0800 RDMA/core: Fix null-ptr-deref in ib_core_cleanup() [ Upstream commit 07c0d131cc0fe1f3981a42958fc52d573d303d89 ] KASAN reported a null-ptr-deref error: KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 1 PID: 379 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:destroy_workqueue+0x2f/0x740 RSP: 0018:ffff888016137df8 EFLAGS: 00000202 ... Call Trace: ib_core_cleanup+0xa/0xa1 [ib_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa1a0d221b7 ... It is because the fail of roce_gid_mgmt_init() is ignored: ib_core_init() roce_gid_mgmt_init() gid_cache_wq = alloc_ordered_workqueue # fail ... ib_core_cleanup() roce_gid_mgmt_cleanup() destroy_workqueue(gid_cache_wq) # destroy an unallocated wq Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init(). Fixes: 03db3a2d81e6 ("IB/core: Add RoCE GID table management") Signed-off-by: Chen Zhongjin Link: https://lore.kernel.org/r/20221025024146.109137-1-chenzhongjin@huawei.com Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit bbc5d7b46a729bfcbb5544f6612b7a67dd4f4d6f Author: Chen Zhongjin Date: Wed Oct 26 10:03:21 2022 +0800 net: dsa: Fix possible memory leaks in dsa_loop_init() [ Upstream commit 633efc8b3dc96f56f5a57f2a49764853a2fa3f50 ] kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Chen Zhongjin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 925cb538bd5851154602818dc80bf4b4d924c127 Author: Zhang Xiaoxu Date: Thu Oct 20 11:20:54 2022 +0800 nfs4: Fix kmemleak when allocate slot failed [ Upstream commit 7e8436728e22181c3f12a5dbabd35ed3a8b8c593 ] If one of the slot allocate failed, should cleanup all the other allocated slots, otherwise, the allocated slots will leak: unreferenced object 0xffff8881115aa100 (size 64): comm ""mount.nfs"", pid 679, jiffies 4294744957 (age 115.037s) hex dump (first 32 bytes): 00 cc 19 73 81 88 ff ff 00 a0 5a 11 81 88 ff ff ...s......Z..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007a4c434a>] nfs4_find_or_create_slot+0x8e/0x130 [<000000005472a39c>] nfs4_realloc_slot_table+0x23f/0x270 [<00000000cd8ca0eb>] nfs40_init_client+0x4a/0x90 [<00000000128486db>] nfs4_init_client+0xce/0x270 [<000000008d2cacad>] nfs4_set_client+0x1a2/0x2b0 [<000000000e593b52>] nfs4_create_server+0x300/0x5f0 [<00000000e4425dd2>] nfs4_try_get_tree+0x65/0x110 [<00000000d3a6176f>] vfs_get_tree+0x41/0xf0 [<0000000016b5ad4c>] path_mount+0x9b3/0xdd0 [<00000000494cae71>] __x64_sys_mount+0x190/0x1d0 [<000000005d56bdec>] do_syscall_64+0x35/0x80 [<00000000687c9ae4>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: abf79bb341bf ("NFS: Add a slot table to struct nfs_client for NFSv4.0 transport blocking") Signed-off-by: Zhang Xiaoxu Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 0bc335d0100ed19f84a5848b4fe9cf96584de8fd Author: Trond Myklebust Date: Sun Oct 16 14:44:33 2022 -0400 NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot [ Upstream commit e59679f2b7e522ecad99974e5636291ffd47c184 ] Currently, we are only guaranteed to send RECLAIM_COMPLETE if we have open state to recover. Fix the client to always send RECLAIM_COMPLETE after setting up the lease. Fixes: fce5c838e133 ("nfs41: RECLAIM_COMPLETE functionality") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 405309d86021c4617e590b7e555e89596371c3a6 Author: Trond Myklebust Date: Sun Oct 16 14:44:32 2022 -0400 NFSv4.1: Handle RECLAIM_COMPLETE trunking errors [ Upstream commit 5d917cba3201e5c25059df96c29252fd99c4f6a7 ] If RECLAIM_COMPLETE sets the NFS4CLNT_BIND_CONN_TO_SESSION flag, then we need to loop back in order to handle it. Fixes: 0048fdd06614 ("NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 25760a41e3802f54aadcc31385543665ab349b8e Author: Dean Luick Date: Tue Oct 18 10:27:50 2022 -0400 IB/hfi1: Correctly move list in sc_disable() [ Upstream commit 1afac08b39d85437187bb2a92d89a741b1078f55 ] Commit 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()") incorrectly tries to move a list from one list head to another. The result is a kernel crash. The crash is triggered when a link goes down and there are waiters for a send to complete. The following signature is seen: BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] Call Trace: sc_disable+0x1ba/0x240 [hfi1] pio_freeze+0x3d/0x60 [hfi1] handle_freeze+0x27/0x1b0 [hfi1] process_one_work+0x1b0/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xd7/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 The fix is to use the correct call to move the list. Fixes: 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()") Signed-off-by: Dean Luick Signed-off-by: Dennis Dalessandro Link: https://lore.kernel.org/r/166610327042.674422.6146908799669288976.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 6b5c87f9b3f87d20935004d528e157dda30e4ea6 Author: Håkon Bugge Date: Wed Oct 12 16:15:42 2022 +0200 RDMA/cma: Use output interface for net_dev check [ Upstream commit eb83f502adb036cd56c27e13b9ca3b2aabfa790b ] Commit 27cfde795a96 ("RDMA/cma: Fix arguments order in net device validation") swapped the src and dst addresses in the call to validate_net_dev(). As a consequence, the test in validate_ipv4_net_dev() to see if the net_dev is the right one, is incorrect for port 1 <-> 2 communication when the ports are on the same sub-net. This is fixed by denoting the flowi4_oif as the device instead of the incoming one. The bug has not been observed using IPv6 addresses. Fixes: 27cfde795a96 ("RDMA/cma: Fix arguments order in net device validation") Signed-off-by: Håkon Bugge Link: https://lore.kernel.org/r/20221012141542.16925-1-haakon.bugge@oracle.com Reviewed-by: Leon Romanovsky Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin